Abstract:A novel and sensitive approach for the accurate determination of antimony (Sb) in natural waters is described using photochemical vapor generation (PVG) coupled with inductively coupled plasma mass spectrometry (ICPMS) for detection. Utilizing a unique flow-through photochemical reactor capable of subjecting the samples to deep-UV (185 nm) radiation, generation efficiency was found to be independent of whether Sb(III), Sb(V), or organometallic species [trimethyltantimony(V)dibromine, TMSb(V)] were present, eliminating the shortcoming of Sb species depended sensitivity encountered during direct solution nebulization by ICPMS. Furthermore, the potentially severe matrix effect from seawater was efficiently eliminated by using a mixture of 5% (v/v) formic and 15% acetic acids (v/v) as the photochemical reductant, making direct determination of Sb in seawater feasible. The proposed method provides a 15-fold improvement in sensitivity over direct solution nebulization. A method detection limit of 0.0006 ng g(-1) based on external calibration was obtained (0.0002 ng g(-1) for isotope dilution), yielding a 15-fold improvement over that for direct solution nebulization. Accuracy is demonstrated by analysis of two water certified reference materials (CRMs, e.g., SLRS-6 and NIST 1640a) with satisfying results. In addition, spike recoveries of 100.6 ± 5.5% and 100.8 ± 3.8% (standard deviation, n = 3) were obtained for NASS-6 and CASS-5 seawater CRMs, respectively, since no certified values for Sb has been established for these materials. The performance of several calibration strategies, including double isotope dilution (ID), multiple and single-point gravimetric standard additions with internal standardization, as well as multiple and single-point gravimetric standard additions alone was examined. High precision of determination of Sb in four natural water samples (0.51-1.4%) was realized based on ID calibration, whereas one-point gravimetric standard addition calibration with internal standardization provided precisions of 1.6% and 3.3% at 0.22 and 0.44 ng g(-1) levels, respectively, in seawater.

Comparison of masking agents for antimony speciation analysis using hydride generation atomic fluorescence spectrometry

Ultra-sensitive determination of antimony valence by solution cathode glow discharge optical emission spectrometry coupled with hydride generation

Speciation of Antimony(iii) and Antimony(v) Species by Using High-Performance Liquid Chromatography Coupled to Hydride Generation Atomic Absorption Spectrometry

Speciation analysis of Sb(III) and Sb(V) by hydride generation-smartphone colorimetric system using metal organic framework as substrate

Speciation of antimony(III) and antimony(V) using hydride generation inductively coupled plasma atomic emission spectrometry combined with the rate of pre-reduction of antimony

On-line Cloud Point Extraction Combined with Electrothermal Vaporization Inductively Coupled Plasma Atomic Emission Spectrometry for the Speciation of Inorganic Antimony in Environmental and Biological Samples.

Determination of antimony(III) and antimony(V) in natural waters at ultratrace levels by flow injection on-line sorption preconcentration coupled with hydride generation atomic fluorescence spectrometry

High Sensitivity Determination of Antimony with Application for the Characterization of Its Migration in Bottled Water by a Dielectric Barrier Discharge (DBD) Coupled with Hydride Generation – Atomic Fluorescence Spectrometry (HG-AFS)

Antimony speciation by inductively coupled plasma mass spectrometry using solid phase extraction cartridges.

Hydride generation smartphone readable colorimetric system for speciation analysis of inorganic antimony without chromatographic separation

Direct Determination of Trace Antimony in Natural Waters by Photochemical Vapor Generation Icpms: Method Optimization and Comparison of Quantitation Strategies

Speciation of Antimony in Soils and Sediments by Liquid Chromatography–Hydride Generation–Atomic Fluorescence Spectrometry

Determination of antimony in environment samples by gas phase chemiluminescence detection following flow injection hydride generation and cryotrapping.

On-site Monitoring of Dissolved Sb Species in Natural Waters by an Automatic System Using Flow Injection Coupled with Hydride Generation Atomic Fluorescence Spectrometer

Speciation of inorganic As(V)/As(III) in water and soil by hydride generation-atomic fluorescence spectrometry

Simultaneous speciation analysis of inorganic arsenic and antimony by on-line microwave-assisted oxidation and hydride generation-atomic fluorescence spectrometry

Determination of antimony in water samples by hydride generation coupled with atmospheric pressure glow discharge atomic emission spectrometry

Direct and Sensitive Determination of Antimony in Water by Hydrogen-Doped Solution Anode Glow Discharge-Optical Emission Spectrometry Without Hydride Generation

Highly Sensitive Determination of Trace Antimony in Water Samples by Cobalt Ion Enhanced Photochemical Vapor Generation Coupled with Atomic Fluorescence Spectrometry or ICP-MS

Simultaneous Electrochemical Determination of Sb(III) and Sb(V) in Water Samples: Deposition Potential Differences and Sb(III) Photooxidation Characteristics

Electrothermal Desolvation-Enhanced Dielectric Barrier Discharge Plasma-Induced Vapor Generation for Sensitive Determination of Antimony by Atomic Fluorescence Spectrometry