Abstract:Scanning electron microscopy‐based high‐resolution digital image correlation (HRDIC) is now an established technique, providing full‐field strain and displacement measurement at the microscale. Techniques for generating speckle patterns for sub‐micron strain mapping can often be either substrate dependent or rely on applying aggressive conditions which may alter the microstructure of interest or damage the substrate in highly sensitive materials. We detail a modification of a methodology successfully applied in the literature to allow its use with metallic materials that are particularly sensitive to the corrosive media, such as copper‐base alloys. Nanometre‐thick silver films, applied with physical vapour deposition, are remodelled using NaBr in non‐aqueous isopropanol, replacing the aqueous solution of NaCl in the original method, forming a uniform dispersion of silver islands highly suitable for digital image correlation (DIC) measurement. The entire procedure is performed at ambient temperature. We find that the DIC pattern is suitably electron transparent to allow electron backscatter diffraction (EBSD) measurements without pattern removal, producing diffraction patterns of sufficient quality for cross‐correlation based high‐angular resolution EBSD. This property facilitates simultaneous EBSD and DIC mapping experiments, providing deeper insights into the kinematics of plastic deformation in crystalline materials. Sub‐100 nm islands are achieved through control of the sputter coating parameters, resulting in DIC cross‐correlation subwindows of 140 nm with a 50% overlap. This resolution is sufficient to capture the fine detail of strain localisation phenomena during plastic deformation, demonstrated here with a case study in CuCrZr, a precipitation‐hardened heat sink material for application in nuclear fusion components. Here, we extract full‐field displacement data with DIC and corresponding orientation information using EBSD without the need for pattern removal.

Nanoscale In-Plane Displacement Evaluation by AFM Scanning and Digital Image Correlation Processing

Nano-Displacement Measurement Based On Virtual Pinhole Confocal Method

Atomistic perspective on in situ nanomechanics

Nanoscale Deformation Analysis With High-Resolution Transmission Electron Microscopy and Digital Image Correlation

Surface Patterning for Multi-Scale Strain Analysis of In-Situ Sem Mechanical Experiments

Afm Scanning Moire Method For Nano-Deformation Measurement

A Stitching Method for AFM Based Large Scale Scanning with High Resolution

Deformation analysis in microstructures and micro-devices

Quantification of surface displacements and electromechanical phenomena via dynamic atomic force microscopy

An integrated push-to-pull micromechanical device: Design, fabrication, and in-situ experiment

Measurement of Sub-Surface Microstructures Based on a Developed Ultrasonic Atomic Force Microscopy

Nano-fabrication System Based on Atomic Force Microscopy

Fabrication Technique of Deformation Carriers (gratings and Speckle Patterns) with Fib for Microscale/Nanoscale Deformation Measurement

Position Measuring System in Metrological Atomic Force Microscope

Nanoscale speckle patterning for combined high‐resolution strain and orientation mapping of environmentally sensitive materials

The digital geometric phase technique applied to the deformation evaluation of MEMS devices

Nanodiamond-based spatial-temporal deformation sensing for cell mechanics

Investigation of Near-Surface Mechanical Properties of Materials Using Atomic Force Microscopy

Scanning-Digital Image Correlation for Moving and Temporally Deformed Surfaces in Scanning Imaging Mode

Experimental study on nanometer moire method

In-plane deformation measurement using the atomic force microscope moiré method