Construction Quality Control of High-Strength Bolts for Stiffening Steel Truss Girder of Aizhai Bridge

ZHANG Jian-ping,HE Shu-long,ZHANG Nian-lai,HUANG Shao-qiao

2012-01-01

Abstract:To study the method for construction quality control of the frictional high-strength bolts,the Aizhai Bridge is cited as an example.In view of the fact that the pre-tensioning forces of the bolts are mainly affected by the torque coefficients and tightening torque,the construction quality control of the bolts is studied mainly from aspects of the following countermeasures of formulation of the tightening workmanship,field inspection of the slip resistance coefficients of the bolts and bolted surfaces,calibration of the tightening spanners,formulation and control of the tightening torque and changes of the torque coefficients.The bolts of the cited bridge were tightened by the torque method in two steps of the initial and final tightening.The results of the field torque coefficient test,tightening yield control test and slip resistance coefficient test could all satisfy the relevant requirements in the codes.The final tightening torque of the bolts of the bridge was checked by the fastening method and the tightening torque was timely adjusted in pace with the changes of the torque coefficients and changing tendency of temperature and humidity.The surfaces of the bolts were process treated and the effect of the ambient conditions on the torque coefficients was therefore reduced.As a consequence,the construction quality control of the bolts of the bridge was good and the bolted connection was reliable.