Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Strengthening Method of T-Beam Bridge and Effectiveness Evaluation

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Performance Monitoring of Damaged Bridge Members Strengthened with Carbon Fiber Reinforced Polymer

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Analysis and strengthening of superstructure diseases of concrete bridges in China

Multi-rib Arch Bridge Strengthened by Stayed-Cable and Field Test

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Study on Static and Dynamic Behavior of T-Frame Bridge Reinforced by External Tendons

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System

Study on Method of Simulating Spatial Effect of Prestressing Force in Bridge

Simulating analysis of cantilever casting of prestressed concrete bridge

Evaluating the Strengthening Effect of a Cracking Cross-beam for a Steel Truss Bridge

Experimental Analysis on Strengthening Materials of Orthotropic Steel Bridge Decks

Behaviour Analysis of Prestressed Concrete Deck-Tied Arch Bridge

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF TOWER OF CABLE STAYED BRIDGE OF THE SECOND YANGTZE RIVER BRIDGE IN NANJING

An experimental study on bearing capacity of simply supported T-beam bridge strengthened with steel plates

Reinforced Concrete Multi-Rib Arch Bridge Strengthened by Changing Structural System

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements

Analysis and strengthening of substructure diseases of concrete bridges in China