Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Behaviour Analysis of Prestressed Concrete Deck-Tied Arch Bridge

The anti-arch inhibition effect of multispan continuous girder bridge strengthened with prestressed CFRP plates

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Analysis of the Existing Reinforced Concrete Rigid Frame Arch Bridge Strengthened with Arch and Cable System

Influence of Effective Prestress on Ultimate Bearing Capacity for Large-Span Prestressed Concrete Bridge

DESIGN AND ANALYSIS OF ARCH TOWER CABLE-STAYED BRIDGE

Research on Spatial Effect of Prestressing Force in Long-Span Concrete Bridge

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Analysis for Instant Invert Arch of Prestressed Beams after Tension

Analysis of Prestressed Concrete Bridge with Virtual Laminated Element Method

Load Analysis on Asphalt Concrete Deck Pavement With Submodel Method

Multi-rib Arch Bridge Strengthened by Stayed-Cable and Field Test

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Analysis of Ultimate Loading Capacity of the Prestressed Concrete Curved Bridge

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints