Abstract:In a H2/N2 atmosphere, the reduction processes of Mg–Fe–O and Mg–Fe–Al–O complex oxide catalysts, derived from their hydrotalcite precursors, were studied by means of temperature-programmed reduction (TPR). In particular, the reduction process of the Mg–Fe–O samples with a Mg/Fe ratio of 1/1 and Mg–Fe–Al–O with a Mg/Fe/Al ratio of 2/1/1 were investigated in detail in combination with in situ Mössbauer spectroscopy and X-ray diffraction (XRD). For the Mg–Fe–O sample, two peaks were observed in the TPR profile with peak temperatures at 446 and 696°C, respectively, indicating that the reduction of the oxide catalyst proceeded via two stages. Mössbauer spectroscopy and XRD showed that the phases in the sample were MgFe2O4 and MgO before TPR. At the first TPR peak (446°C), MgFe2O4 was completely reduced to Mg1−xFexO. The Mössbauer spectrum of Mg1−xFexO exhibited a doublet with IS=0.83 mm/s and QS=0.87 mm/s. The second TPR peak (696°C) corresponded to the reduction of Mg1−xFexO to Fe0. For the Mg–Fe–Al–O sample, two peaks were also observed in the TPR profile with temperatures at 506 and 936°C, respectively. Mössbauer spectroscopy and XRD showed that the phases in the sample were α-Fe2O3, MgFeAlO4, and MgO before TPR. The Mössbauer spectrum of MgFeAlO4 was a doublet with IS=0.33 mm/s and QS=0.76 mm/s. At the first TPR peak (506°C), α-Fe2O3 was reduced to Fe2+ and Fe0, while MgFeAlO4 was transformed into Mg1−xFexO. The second TPR peak (936°C) corresponded to the reduction of Mg1−xFexO to metallic Fe0. Effects of the presence of magnesium and aluminum in the solid solutions on the reduction of iron species were discussed.

Hydrogen Reduction Studies of Members of the System MgFe2−xCrxO4

Development of Ti–Zr–Mn–Cr-(V–Fe) Based Alloys for Hydrogen Feeding System in Hydrogen Metallurgy Application

Hydrogen Storage Properties of Mg+10% TiFe_(1-x)Cr_x(x=0,0.3) Multi-Phase Alloys

Influence of Fe Content on the Microstructure and Hydrogen Storage Properties of Ti16Zr5Cr22V57−xFex (x = 2–8) Alloys

Hydrogen Storage Properties of FeTi1.3 + X Wt%mm (x = 0.0, 1.5, 3.0, 4.5, 6.0) Hydrogen Storage Alloys

Microstructures and hydrogen storage characteristics of (Ti0.1V0.9)(100-x)Fe-x (x=0 similar to 6) alloys

Reduction of an Α-Fe2o3(0001) Film Using Atomic Hydrogen

Crystal facet-dependent reduction behavior of α-Fe2O3 in hydrogen atmosphere

Microstructures and Hydrogen Storage Properties of Ti10V83-xFe6ZrMnx Alloys

Studies of hydrogen storage properties and absorption-desorption mechanism of FeTi1.3(Mm)y alloy

The Effect of Cr Content on the Structural and Hydrogen Storage Characteristics of Ti10V80−xFe6Zr4Crx (x = 0–14) Alloys

Microstructure and hydrogen storage properties of Ti10V84-xFe6Zrx (x = 1-8) alloys

Phase Structures and Hydrogen Storage Properties of TiV1.35Cr1.35-xMnx Alloys(x=0～0.45)

Study on the Structure and Reduction Behaviour of the Iron–zirconium Oxide System

A study on the reduction behavior of Fe2(MoO4)3 with a combined in-situ temperature-programmed reduction-M?ssbauer spectroscopic technique

Hydrogen Storage Properties and Crystal Structure of Ti-Cr Based Alloys

Phase structures and hydrogen storage properties

The Reduction of Mg–Fe–O and Mg–Fe–Al–O Complex Oxides Studied by Temperature-Programmed Reduction Combined with in Situ Mössbauer Spectroscopy

Autocatalytic partial reduction of FeO(111) and Fe3O4(111) films by atomic hydrogen

Theoretical Study of YFe2H (x = 0–5): A Comparison Between Cubic and Orthorhombic Phases

Study on the Hydrogen Storage Property of (Tizr0.1)(x)cr1.7-Yfeymn0.3 (1.05 < X < 1.2, 0.2 < Y < 0.6) Alloys