Abstract:Conventional pseudomorphic high electron mobility transistor (pHEMTs) with lattice-matched InGaAs/InAlAs/InP structures exhibit high mobility and saturation velocity and are hence attractive for the fabrication of three-terminal low-noise and high-frequency devices, which operate at room temperature. The major drawbacks of conventional pHEMT devices are the very low breakdown voltage (<2 V) and the very high gate leakage current (∼1 mA/mm), which degrade device and performance especially in monolithic microwave integrated circuits low-noise amplifiers (MMIC LNAs). These drawbacks are caused by the impact ionization in the low band gap, i.e., the InxGa(1-x)As (x = 0.53 or 0.7) channel material plus the contribution of other parts of the epitaxial structure. The capability to achieve higher frequency operation is also hindered in conventional InGaAs/InAlAs/InP pHEMTs, due to the standard 1 μm flat gate length technology used. A key challenge in solving these issues is the optimization of the InGaAs/InAlAs epilayer structure through band gap engineering. A related challenge is the fabrication of submicron gate length devices using I-line optical lithography, which is more cost-effective, compared to the use of e-Beam lithography. The main goal for this research involves a radical departure from the conventional InGaAs/InAlAs/InP pHEMT structures by designing new and advanced epilayer structures, which significantly improves the performance of conventional low-noise pHEMT devices and at the same time preserves the radio frequency (RF) characteristics. The optimization of the submicron T-gate length process is performed by introducing a new technique to further scale down the bottom gate opening. The outstanding achievements of the new design approach are 90% less gate current leakage and 70% improvement in breakdown voltage, compared with the conventional design. Furthermore, the submicron T-gate length process also shows an increase of about 58% and 33% in fT and fmax, respectively, compared to the conventional 1 μm gate length process. Consequently, the remarkable performance of this new design structure, together with a submicron gate length facilitatesthe implementation of excellent low-noise applications.

40nm T-gate Preparation Technology on GaAs Substrate

Spacer Side-wall Processed 0.15 Μm GaN HEMT for Ka-band Application

T-shaped Gate AlGaN/GaN HEMTs Fabricated by Femtosecond Laser Lithography Without Ablation

A composite algorithm of lithography process in AlGaN/GaN-on-SiC HEMTs manufacturing

Mm-Wave Performance of 50nm T-Gate AlGaAs/InGaAs Pseudomorphic High Electron Mobility Transistors with Ft of 200 GHz

Nanofabrication of air-spaced field-plate gates with ultra-short footprint

High Performance 50nm T-Gate In0.52A10.48As/In0.53Ga0.47As Metamorphic High Electron Mobility Transistors

Optimized recess etching criteria for T‐gate fabrication achieving ft= 290 GHz at Lg= 124 nm in metamorphic HEMT with In0.7Ga0.3As channel

High performance 50nm T-gate In(0.52)A1(0.48)As/In0.53Ga0.47As metamorphic high electron mobility transistors

Nitride Spacer Aided 0.15 Μm AlGaN/GaN HEMT Fabrication with Optimized Gate Patterning Process

The Optimization and Fabrication of High Electron Mobility Transistors Integrated with Microstructure

Fabrication of AlGaN/GaN Fin-Type HEMT Using a Novel T-Gate Process for Improved Radio-Frequency Performance

0.15 μm GaN MMIC PA Based on Advanced i-line Lithography Process

High performance gate length 22 nm CMOS device with strained channel and EOT 1.2 nm

Self-aligning gate construction nano field-effect transistor and preparation thereof

Self-assembled monolayer gate doping and their detail deep cryogenic characterization of GaN/Si HEMTs

InGaAs HEMTs with T‐gate electrodes formed by multi‐layer SiCN molds

New Submicron Low Gate Leakage In0.52Al0.48As-In0.7Ga0.3As pHEMT for Low-Noise Applications

Advanced nano-lithography technology

The Application of Optical Resolution Enhancement Technology and E-Beam Direct Writing Technology in Microfabrication

High-Performance Normally-Off Operation p-GaN Gate HEMT on Free-Standing GaN Substrate