Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

Virtual Proving Ground of Tire Mechanical Characteristics

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

The Influence of Tire Inflation Pressure on the Stress Distribution of Motorcycle Wheels

Research on simplified tire finite element modeling and simulation method

Electric Vehicle Tires Test Bench Design for Laboratory

Analysis of Vibration Characteristics and Influencing Factors of Complex Tread Pattern Tires Based on Finite Element Method

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

FINITE ELEMENT SIMULATION FOR STATIC LOAD TEST OF RADIAL TIRES

Mechanical properties of cord-rubber composites and tire finite element analysis

Tire Modeling of Rolling Properties Using Experimental Modal Parameters

Finite Element Analysis for Tread Wear of Radial Tire

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

A novel theoretical model of tire in-plane dynamics on uneven roads and its experimental validation

A Design of Intelligent Tire Prototype Based on Multiple Accelerometers

Tire cornering simulation using finite element analysis

A Universal Approach to Tire Forces Estimation by Accelerometer-Based Intelligent Tire: Analytical Model and Experimental Validation

Numerical simulation on influence of tire pressure to stress distribution in wheel

Prediction of rolling resistance and wheel force for a passenger car tire: A comparative study on the use of different material models and numerical approaches

Research on tire model parameter identification strategy based on CDTire/3D

FEA and Testing Studies on Static Camber Performance of the Radial Tire

Finite Element Analysis on Tire Vibration and Study on Its Key Influencing Factors