Abstract:The hysteresis of rubber materials due to deformation and viscoelasticity is the main reason for the heat build-up (HBU) and rolling resistance (RR) of the rolling tire. It is important to realize the high precision prediction of HBU and RR of tire for the optimal design of high-performance fuel-saving tire. In this work, a thermo-mechanical coupling method based on Endurica and Abaqus co-simulation was used to predict the steady-state temperature distribution and RR of three finite element models (Lagrangian–Eulerian model, Lagrangian model, and Plane Strain model) of the solid tires under different loads and rotating speeds. The simulation results were compared with the experimental results. The Kraus self-heating model was utilized in the thermo-mechanical coupling method, which realized the quantitative relationship between the dynamic loss modulus of rubber and the loading conditions (temperature, strain, and strain rate). Special attention was paid to the determination of the material parameters in the Kraus self-heating model. The comparison between simulation results and experimental results shows that the Lagrangian model had the highest prediction accuracy, and the average prediction errors of the steady-state surface temperature and RR under three loading conditions were 3.4% and 7.9%, respectively. The Lagrangian–Eulerian model came in the second with average errors of 9.7% and 11.1%, respectively. The Plane Strain model had the worst prediction accuracy, with the average errors of 21.4% and 44.6%, respectively. In terms of the simulation time, the Plane Strain model had the lowest cost, and the average calculation time was 1143 s. The Lagrangian–Eulerian model took the second place, with an average calculation time of 2621 s. The Lagrangian model had the highest computation cost, with an average time of 5597 s. The comparison between the simulation results and the experimental results verified the effectiveness of the thermo-mechanical coupling analysis method. The methods of three finite element models of the solid tires in this work can provide some reference for the optimization design of elastomeric components (Lagrangian model), pneumatic tires (Lagrangian–Eulerian model), and non-pneumatic tires (Plane Strain model).

Tire Modeling of Rolling Properties Using Experimental Modal Parameters

Theory and Method of Tire Rolling Kinematics and Prediction of Tire Forces and Moments

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Modeling of Tire Rolling Contact Response by REF Model

Research on simplified tire finite element modeling and simulation method

A novel theoretical model of tire in-plane dynamics on uneven roads and its experimental validation

Computer simulation of tire rolling resistance using finite element method: Effect of linear and nonlinear viscoelastic models

Isogeometric Analysis for Accurate Modeling of Rolling Tires

Research on tire model parameter identification strategy based on CDTire/3D

A Theoretical Model for the Tread Slip and the Effective Rolling Radius of the Tyres in Free Rolling

Experimental And Fe Investigation On Rolling Resistance Of Truck Tires

A new method for selecting and evaluating the hyperelastic model of tread rubber material under rolling contact condition

Prediction of rolling resistance and wheel force for a passenger car tire: A comparative study on the use of different material models and numerical approaches

A novel evaluation on rolling resistance characteristics of truck tire through the simplified experimental modal analysis

Effect of Tire Repeated Root Modal on Tire Modelling with Experimental Modal

The modified in-plane rigid-elastic-coupled tire modal model: dynamic response to short wavelength road profiles

A THREE-DIMENSIONAL TIRE RING ON ELASTIC FOUNDATION MODEL IN ROLLING CONTACT WITH APPLICATION TO INTELLIGENT TIRES

Tire Rolling Kinematics Model for an Intelligent Tire Based on an Accelerometer

Heat Build-Up and Rolling Resistance Analysis of a Solid Tire: Experimental Observation and Numerical Simulation with Thermo-Mechanical Coupling Method

Investigation of Frequency Split Phenomenon of Rolling Tire Vibration Property Using a New Naming Convention

Study on Mechanics of Steady State Free Rolling Tires