Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

Electric Vehicle Tires Test Bench Design for Laboratory

Loading Design for Comprehensive Performance Test Bench of Drive Axle Assembly

Design and Modeling of a Test Bench for Dual-Motor Electric Drive Tracked Vehicles Based on a Dynamic Load Emulation Method

Models of Two-Axle Driving Vehicle Used for Dynamometer Test Bench

Design of Multifunctional Electric Wheel Test-Bed

Key Items in Tire Non-Steady State Test

Virtual Proving Ground of Tire Mechanical Characteristics

Design and Application of Driving Resistance Test Device for Aircraft Tire and Soil Pavement

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

A Design of Intelligent Tire Prototype Based on Multiple Accelerometers

Double-Drum Test Bench for Variable Load Transfer Simulation by Electromechanical Inertia Compensation

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Dynamic Simulation and Experiment of Electric Drive System on Test Bench

The Development of Dynamic Test Bench for EV Hybrid Brake System

Finite Element Modeling and Analysis of Temperature Field of Tire

Dual-test Bench for High-Power Traction Motor Propulsion System on EV

90-Degree Impact Bench Test and Simulation Analysis of Automotive Steel Wheel

Design, modeling, and verification of a test bench for braking simulation of 1/4 vehicle

Development of Measurement and Control System for Test Bench of Electric Wheel Drive System

Inertia Matching During Dynamic Simulation of Vehicle Drive System on Test Bench

Design of a Test Bench System for Automated Mechanical Transmission