Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

A Fast and Accurate Tire Model for Vehicle Stability Control Simulation under All Working Conditions

Optimal allocation of tire force based on vehicle stability

Research on simplified tire finite element modeling and simulation method

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

A novel theoretical model of tire in-plane dynamics on uneven roads and its experimental validation

Comparative Study of Tire Models Applied to Electronic Stability Control in Automotive Simulator

Model-Based Vehicle Stability Control with Tyre Force and Instantaneous Cornering Stiffness Estimation

Extended Pacejka Tire Model for Enhanced Vehicle Stability Control

A Universal Approach to Tire Forces Estimation by Accelerometer-Based Intelligent Tire: Analytical Model and Experimental Validation

State of the Art for Tire Dynamical Model Research

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

A Fusion Estimation of Tire Vertical Forces Using Model-Based Tire State Estimators for a Dual-Sensor Intelligent Tire

Simulation Analysis of Tire Dynamic Model

Simultaneous Estimation of Tire Side-Slip Angle and Lateral Tire Force for Vehicle Lateral Stability Control

Tire/Wheel Torsional Dynamic Behaviour and Road Friction Coefficient Estimation

Estimation of Longitudinal Force, Sideslip Angle and Yaw Rate for Four-Wheel Independent Actuated Autonomous Vehicles Based on PWA Tire Model

Modeling and analysis of vehicle stability region based on Lyapunov and coordinated control

Fast Estimation and Compensation of the Tyre Force in Real Time Control for Vehicle Dynamic Stability Control System

An Explicit Discrete-Time Dynamic Vehicle Model with Assured Numerical Stability

The Simulation Study of the Car Curve Traveling Traction Control System

Advanced Tire Friction Modeling and Monitoring