Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

State of the Art for Tire Dynamical Model Research

Research on simplified tire finite element modeling and simulation method

Advanced Tire Friction Modeling and Monitoring

A novel theoretical model of tire in-plane dynamics on uneven roads and its experimental validation

A THREE-DIMENSIONAL TIRE RING ON ELASTIC FOUNDATION MODEL IN ROLLING CONTACT WITH APPLICATION TO INTELLIGENT TIRES

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

A Universal Approach to Tire Forces Estimation by Accelerometer-Based Intelligent Tire: Analytical Model and Experimental Validation

A detailed tire tread friction model considering dynamic friction states

A Dynamic Model for Tire/Road Friction Estimation under Combined Longitudinal/Lateral Slip Situation

Tire Rolling Kinematics Model for an Intelligent Tire Based on an Accelerometer

Research on tire model parameter identification strategy based on CDTire/3D

A Fast and Accurate Tire Model for Vehicle Stability Control Simulation under All Working Conditions

Theory and Method of Tire Rolling Kinematics and Prediction of Tire Forces and Moments

Dynamic Tire Model for Vehicle Emergency Braking Simulation

Modeling of Tire Rolling Contact Response by REF Model

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

Simulation Analysis of Tire Dynamic Model

Tire Modeling of Rolling Properties Using Experimental Modal Parameters

A Fusion Estimation of Tire Vertical Forces Using Model-Based Tire State Estimators for a Dual-Sensor Intelligent Tire

Tyre wear model: A fusion of rubber viscoelasticity, road roughness, and thermodynamic state

Research on tyre mechanics model for multi-axle coordinated steering of heavy vehicles