Abstract:Brake-by-wire systems are one of the key components in intelligent/unmanned vehicles that have attracted worldwide attention. Testing and evaluation of brake-by-wire systems are a significant step during the development of the technology of vehicular braking and further the advancement of intelligent/unmanned vehicles. Using the test bench to simulate different road adhesion coefficients (i.e. road surfaces) and to complete the testing and evaluation of the vehicle braking systems is of great significance and importance. A test bench for simulation of vehicular braking of 1/4 vehicle is presented and investigated in this article. It is composed of a motor, two rollers, a 1/4 vehicle suspension system, a magnetic powder clutch, a flywheel, sensors, a signal acquisition and processing system, and a controller. The wheel and vehicle speeds are simulated by the rollers and flywheel speeds, respectively. The translational kinetic energy of 1/4 vehicle is simulated by the rotational kinetic energy of the flywheel. The signal acquisition and processing system is used to acquire and process the experimental signals, such as rotational speeds and torques during tests. The magnetic powder clutch with adjusted applied currents in the test bench is used to real-timely simulate roads with different adhesion coefficients. Based on the working principle of the test bench and the fundamentals of vehicle dynamics, the prototype of the test bench is established and the simulation approach of the translational kinetic energy of 1/4 vehicle is investigated. The mathematical model of the real-time simulation about roads with different adhesion coefficients based on the magnetic powder clutch with real-time controllable transmitted torque is established. With the built 1/4 vehicle braking systems based on the test bench and road, and the corresponding established models, the comparison and analysis of the simulation results of various road surfaces are conducted. Experiments are sequentially implemented to verify the feasibility and effectiveness of the test bench.

The Development of Dynamic Test Bench for EV Hybrid Brake System

Design and Modeling of a Test Bench for Dual-Motor Electric Drive Tracked Vehicles Based on a Dynamic Load Emulation Method

Design, modeling, and verification of a test bench for braking simulation of 1/4 vehicle

Emergency Braking Control Strategy for High Speed Electric Drive Tracked Vehicle

Double-Drum Test Bench for Variable Load Transfer Simulation by Electromechanical Inertia Compensation

Hardware-in-the-loop Test Bench for Electromechanical Brake System

Modeling and Integration of Electric Vehicle Regenerative and Friction Braking for Motor/Dynamometer Test Bench Emulation

A Mechanical-Hardware-in-the-Loop Test Bench for Verification of Multimotor Drivetrain Systems

Test Bench Emulation of Slip Ratio During Anti-Lock Braking of Electric Vehicle

A Novel Regenerative Electrohydraulic Brake System: Development and Hardware-in-Loop Tests

Co-Simulation On Performance Evaluation Of A New Electronic Control Hydraulic Braking System

An Innovative HiL Test Environment with a Fully Integrated Brake System and Automated Brake Performance Evaluation

Development of Compact Driver-in-the-Loop EMT Gearshift Test Bench

Development of Fuel Cell Hybrid Powertrain Research Platform Based on Dynamic Testbed

Design of Testbed System for Parallel Hev Powertrain

Research on Performance Test Method of Integrated Electro-Hydraulic Braking System

Dynamic Load Emulation of Slip Ratio Control in Anti-lock Braking of a Front-axle-drive Electric Vehicle

Research on hardware-in-the-loop simulation for hybrid powertrain

Development of a Hardware-in-the-loop Simulation System for Hybrid Electric Vehicle Performance Test

Integration of fuel cell hybrid powertrain based on dynamic testbed

Development of integrated hardware-in-the-loop (hil) test bench anti-lock brake system (abs) instrument