Abstract:Brake-by-wire systems are one of the key components in intelligent/unmanned vehicles that have attracted worldwide attention. Testing and evaluation of brake-by-wire systems are a significant step during the development of the technology of vehicular braking and further the advancement of intelligent/unmanned vehicles. Using the test bench to simulate different road adhesion coefficients (i.e. road surfaces) and to complete the testing and evaluation of the vehicle braking systems is of great significance and importance. A test bench for simulation of vehicular braking of 1/4 vehicle is presented and investigated in this article. It is composed of a motor, two rollers, a 1/4 vehicle suspension system, a magnetic powder clutch, a flywheel, sensors, a signal acquisition and processing system, and a controller. The wheel and vehicle speeds are simulated by the rollers and flywheel speeds, respectively. The translational kinetic energy of 1/4 vehicle is simulated by the rotational kinetic energy of the flywheel. The signal acquisition and processing system is used to acquire and process the experimental signals, such as rotational speeds and torques during tests. The magnetic powder clutch with adjusted applied currents in the test bench is used to real-timely simulate roads with different adhesion coefficients. Based on the working principle of the test bench and the fundamentals of vehicle dynamics, the prototype of the test bench is established and the simulation approach of the translational kinetic energy of 1/4 vehicle is investigated. The mathematical model of the real-time simulation about roads with different adhesion coefficients based on the magnetic powder clutch with real-time controllable transmitted torque is established. With the built 1/4 vehicle braking systems based on the test bench and road, and the corresponding established models, the comparison and analysis of the simulation results of various road surfaces are conducted. Experiments are sequentially implemented to verify the feasibility and effectiveness of the test bench.

Hardware-in-the-loop Test Bench for Electromechanical Brake System

The Development of Dynamic Test Bench for EV Hybrid Brake System

An Automatic Testing System for Vehicle's Drive Axis Performance Test

Design and Modeling of a Test Bench for Dual-Motor Electric Drive Tracked Vehicles Based on a Dynamic Load Emulation Method

Simulation and experimental research of a new automotive electromechanical brake system

Design of automatic hydraulic test bench based on LabVIEW

A Review of Electromechanical Brake(EMB) System

Research on Performance Test Method of Integrated Electro-Hydraulic Braking System

Design, modeling, and verification of a test bench for braking simulation of 1/4 vehicle

Study on Requirements for Load Emulation of the Vehicle With an Electric Braking System.

Co-Simulation On Performance Evaluation Of A New Electronic Control Hydraulic Braking System

Electromechanical braking systems and control technology: A survey and practice

Simulation and Experimental Study of a New Electromechanical Brake with Automatic Wear Adjustment Function

An Innovative HiL Test Environment with a Fully Integrated Brake System and Automated Brake Performance Evaluation

Double-Drum Test Bench for Variable Load Transfer Simulation by Electromechanical Inertia Compensation

Test Bench Emulation of Slip Ratio During Anti-Lock Braking of Electric Vehicle

Development of integrated hardware-in-the-loop (hil) test bench anti-lock brake system (abs) instrument

A Novel Regenerative Electrohydraulic Brake System: Development and Hardware-in-Loop Tests

Proof-of-Concept Design of Electronic Wedge Brake with Multi-Rollers

Research on hardware-in-the-loop simulation for hybrid powertrain

Modeling, Control And Test Of A Novel Electronic Pneumatic Brake System