Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Finite Element Analysis on Tire Vibration and Study on Its Key Influencing Factors

The Influence of Tire Inflation Pressure on the Stress Distribution of Motorcycle Wheels

ANALYSIS STUDY ON BENDING FATIGUE TEST OF AUTOMOBILE WHEELS

Analysis of Vibration Characteristics and Influencing Factors of Complex Tread Pattern Tires Based on Finite Element Method

NUMERICAL SIMULATION OF TIRE VIBRATION NOISE

Study on the tire vibration based on the Donnell-Mushtari theory

Finite Element Analysis of the Influence of Rubber Materials Properties on the Bead Performance of Radial Tire

Research on simplified tire finite element modeling and simulation method

Mechanical properties of cord-rubber composites and tire finite element analysis

The Numerical Analysis of Sound and Vibration from a Tire by FEM and BEM

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Finite Element Analysis for the Curing Process of Radial Tire

Finite Element Analysis for Tread Wear of Radial Tire

FEM ANALYSIS ON STANDING WAVES AND CRITICAL SPEED IN RADIAL TIRE CORD

Relationship between Tire Ground Characteristics and Vibration Noise

An Analysis Study on the Effects of Tire Wear on the Interior Vibration and Noise of Vehicles

FINITE ELEMENT SIMULATION FOR STATIC LOAD TEST OF RADIAL TIRES

EXPERIUMENT AND FINITE ELEMENT ANALYSIS OF STEADY-STATE TEMPERATURE DISTRIBUTION IN ROLLING TIRE UNDER DIFFERENT LOADS AND INITIAL INFLATION PRESSURES

Investigation of Frequency Split Phenomenon of Rolling Tire Vibration Property Using a New Naming Convention

Study on Mechanics of Steady State Free Rolling Tires

A Finite Element Model for the Rolling Loss Prediction and Fracture Analysis of Radial Tires