Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Study on the tire vibration based on the Donnell-Mushtari theory

The Influence of Tire Inflation Pressure on the Stress Distribution of Motorcycle Wheels

Finite Element Analysis on Tire Vibration and Study on Its Key Influencing Factors

Investigation of Frequency Split Phenomenon of Rolling Tire Vibration Property Using a New Naming Convention

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Analysis of Vibration Characteristics and Influencing Factors of Complex Tread Pattern Tires Based on Finite Element Method

Relationship between Tire Ground Characteristics and Vibration Noise

Research on simplified tire finite element modeling and simulation method

An Improved Structural-Acoustic Coupling Model for Tire Cavity Noise

Modeling and Experimental Verification of Torsional Deformation Constitutive Model of Tread Rubber Based on Digital Image Correlation

A Unified Approach for the Vibration Analysis of Cylindrical Shells with General Boundary Conditions

Three-dimensional vibration of a ring with a noncircular cross-section on an elastic foundation

Modal Analysis of a Discrete Tire Model with a Contact Patch and Rolling Conditions Using the Finite Difference Method

An Analysis Study on the Effects of Tire Wear on the Interior Vibration and Noise of Vehicles

A Three-Dimensional Ring Model for Uncertainty Quantification in Natural Frequencies and Sound Radiation Characteristics of Tires

The Numerical Analysis of Sound and Vibration from a Tire by FEM and BEM

Modeling of Tire Rolling Contact Response by REF Model

A novel theoretical model of tire in-plane dynamics on uneven roads and its experimental validation

A novel absolute nodal coordinate formulation thin plate tire model with fractional derivative viscosity and surface integral-based contact algorithm

Numerical Method of Evaluating Noise from Vibrating Tyre

Mechanical properties of cord-rubber composites and tire finite element analysis