Abstract:This paper focuses on the modeling and analysis of a four-groove passenger car tire, size 235/55R19, using finite element analysis. The Mooney–Rivlin material model is employed to define the hyperelastic behavior of the tire rubber compounds for all solid elements. The tire rim is modeled as a rigid body using aluminum alloy material, and the beads are modeled as beam elements using steel material. The tire model is validated in both static and dynamic domains through several simulations and is compared to published measured data. The tire is validated using footprint and vertical stiffness tests in the static domain. In the static footprint test, a steady-state vertical load is applied, and the tire–road contact area is computed. In the vertical stiffness test, a ramp vertical load is applied, and the tire’s vertical displacement is measured to calculate the tire’s vertical stiffness. In the dynamic domain, the tire is validated using drum-cleat and cornering tests. In the drum-cleat test, a drum with a 2.5 m diameter and a cleat with a 15 mm radius is used to excite the tire structure and obtain the frequency of the vertical and longitudinal first modes of vibration, that is, by applying the fast Fourier transformation (FFT) of the vertical and longitudinal reaction forces at the tire center. In addition to this test, the tire model is pre-steered on a flat surface with a two-degree slip angle and subjected to a steady state linear speed of 10 km/h to predict the cornering force and compute the cornering stiffness. In addition, the effect of tire longitudinal speed on the rolling resistance coefficient is then predicted at zero slip angle using the ISO 28580 rolling resistance test. The findings of this research work provide insights into passenger car tire–road interaction analysis and will be further used to perform tire rubber compound material model sensitivity analysis.

The Numerical Analysis of Sound and Vibration from a Tire by FEM and BEM

A Numerical Method for Analyzing the Low-Frequency Noise of Bridge under Vehicle Load

NUMERICAL SIMULATION OF TIRE VIBRATION NOISE

Semi-analytical Vibration Analysis of FGM Cylindrical Shells Surrounded by Elastic Foundations in a Thermal Environment

Numerical Method of Evaluating Noise from Vibrating Tyre

FEM ANALYSIS ON STANDING WAVES AND CRITICAL SPEED IN RADIAL TIRE CORD

Finite Element Analysis on Tire Vibration and Study on Its Key Influencing Factors

A Hybrid Numerical-Experimental Analysis for Tire Air-Pumping Noise with Application to Pattern Optimization

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Finite Element Analysis for Tread Wear of Radial Tire

Appraisal of Numerical Based Finite Element Method to Synthesise the Wheel-Obstacle Collision Dynamics Using a Single-Wheel Tester

Tire cornering simulation using finite element analysis

Application of Finite Element Method in Structure Analysis of Passenger Car Radial Tire

An Implicit To Explicit Fea Solving Of Tire F&M With Detailed Tread Blocks

Analysis of Vibration Characteristics and Influencing Factors of Complex Tread Pattern Tires Based on Finite Element Method

Simulation of Rolling Noise of Truck Tires

Simulation of the Tire Rolling Impact Noise Based on Mixed Lagrange-euler Method

Noise Analysis of an Lightweight Auto-body Using FEM/BEM

Tire-Pavement Interaction Simulation Based on Finite Element Model and Response Surface Methodology

A hybrid experimental-numerical analysis for radial tire air pumping noise generation mechanism

Numberical Analysis on the Steady-State Rolling of Load-Carrying Tire