Abstract:Hydrophobic Mg(OH)2/calcium myristate (Ca[CH3(CH2)12COO]2, CaMS) and Mg(OH)2/magnesium myristate (Mg[CH3(CH2)12COO]2, MgMS) composite coatings were prepared on the alkali-treated AZ31 substrates via both electrodeposition and dipping methods. The morphologies, compositions, and constitutes of the coatings were investigated by using field-emission scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectrometry (FTIR) together with X-ray diffractometer (XRD). Furthermore, electrochemical (polarization and impedance spectroscopy) and hydrogen evolution tests were applied to evaluate the corrosion resistance. The wettability and adhesive strength of the composite coatings were characterized through water static contact angle (CA), sliding angle (SA), and nano-scratch tests. Results indicated that the better super-hydrophobicity, corrosion resistance, and adhesion were achieved via an electrodeposited process. The corrosion current density (icorr) and hydrogen evolution rate (HER) of the electrodeposited coating were three and one orders of magnitude smaller than the substrate, implying a significantly improved corrosion resistance. This scenario was ascribed to the super-hydrophobicity of electrodeposited composite coating with a contact angle (CA) and slide angle (SA) of 159.2° ± 0.8° and 5.2° ± 0.8°, respectively. However, the dipped composite coating was adverse to the improvement of corrosion resistance and adhesion due to the dissolution of the underlying Mg(OH)2 layer and smooth surface with less organic fatty acid salt (MgMS)

Corrosion Resistance of Composite Ceramic Coatings Prepared on Magnesium Alloy by Micro-Arc Oxidation and Hydrothermal Treatment

Micro-arc Oxidation Behaviors of AZ91D Magnesium Alloy in Different Electrolytes

Study on Structure and Properties of Microarc Oxidation Coating Formed on AM60B Magnesium Alloy

Study on structure and properties of microarc oxidation coating on magnesium alloy in phosphate-potassium hydroxide solution

In Situ Preparation of Mg-Al-Co Layered Double Hydroxides on Microarc Oxidation Ceramic Coating of LA103Z Magnesium-Lithium Alloy for Enhanced Corrosion Resistance

Corrosion and tribocorrosion resistance of MAO-based composite coating on AZ31 magnesium alloy

Corrosion resistance enhanced by an atomic layer deposited Al2O3 /micro-arc oxidation coating on magnesium alloy AZ31

Incorporation of Al2O3 and ZrO2 ceramics to AZ31 magnesium alloys composite coating using micro-arc oxidation method

Preparation of Micro-Arc Oxidation Ceramic Coating on Aluminum Alloys

Effect of Several Inorganic Additives on Microstructure and Properties of Microarc Oxidation Coating on Aluminium Alloy

The Ceramic Coatings on AZ91D Magnesium Alloy Formed by PEO and Their Film Microstructure and Corrosion Resistance

Corrosion resistance of a composite polymeric coating applied on biodegradable AZ31 magnesium alloy

Influence of the Ca- or P-containing Electrolyte Compositions on Properties of Micro-arc Oxidation Coatings Fabricated on Mg Alloy

Study on Corrosion Resistance of LDH/Micro-Arc Oxidation Composite Superhydrophobic Coatings on AZ31 Magnesium Alloy

Enhancing Conductivity and Corrosion Resistance by Organic Coatings on AZ31 Magnesium Alloy Treated by Micro-Arc Oxidation

Microstructure and Corrosion Behavior of Thermal-Sprayed Hydroxyapatite/Magnesium Composite Coating on the Surface of AZ91D Magnesium Alloy

Study on micro-arc oxidation coating of magnetic metal powder composite magnesium alloy

Influence of Different Electrolyte Additives and Structural Characteristics of Plasma Electrolytic Oxidation Coatings on AZ31 Magnesium Alloy

Effect of Hydrothermal Treatment on the Corrosion Resistance of CO2 Gas-Assisted MAO Coatings

Corrosion Resistance of Superhydrophobic Mg(OH)2/Calcium Myristate Composite Coating on Magnesium Alloy AZ31

Corrosion and wear resistant polyp-xylene composite coating on AZ31 magnesium alloy prepared by micro-arc oxidation and vapor deposition