Abstract:In this study, we explored the phase compositions and morphologies of the ceramic coatings from different aluminum sources (aluminum isopropoxide, aluminum nitrate, or a mixture of the two) prepared using cathode plasma electrolytic deposition (CPED) onto AZ31 magnesium alloys. Scanning electron microscopy and X-ray diffraction analyses of these coatings indicate that the deposited ceramic made from aluminum isopropoxide was composed of gamma-Al2O3 whereas the one made from aluminum nitrate was composed of MgAl2O4, and that the former was more compact and uniform than the latter. A composite coating was prepared using epoxy resin as a protective layer that sealed the micropores on the CPED coating, thereby further improving its anticorrosion property. The elemental distribution of the cross-section of the composite coating was examined via energy dispersive spectroscopy. Corrosion resistance was investigated using potentiodynamic polarization curves and electrochemical impedance spectroscopy in a 3.5 wt% NaCl( )medium, and a salt spray test. The results indicate that the corrosion protection property of the Al2O3/epoxy resin coating of the magnesium alloy was better than that of the single Al2O3 coating. A cross-cut test revealed that the adhesion of the Al2O3/epoxy resin composite coating to the magnesium alloy surface was better than that of the single epoxy resin coating. The approach presented herein provides an attractive way to modify the surface of magnesium alloys to improve anticorrosion.

Enhancing Conductivity and Corrosion Resistance by Organic Coatings on AZ31 Magnesium Alloy Treated by Micro-Arc Oxidation

Micro-arc Oxidation Behaviors of AZ91D Magnesium Alloy in Different Electrolytes

Study on Structure and Properties of Microarc Oxidation Coating Formed on AM60B Magnesium Alloy

Improved Corrosion Resistance of Al2O3 Ceramic Coatings on AZ31 Magnesium Alloy Fabricated Through Cathode Plasma Electrolytic Deposition Combined with Surface Pore-Sealing Treatment

Corrosion resistance enhanced by an atomic layer deposited Al2O3 /micro-arc oxidation coating on magnesium alloy AZ31

Study On Epoxy Resin/Multi-Walled Carbon Nanotubes Conductive Coating On Az31 Magnesium Alloy After Micro-Arc Oxidation

Effect of Electrolyte on Microstructure and Corrosion Resistance of Micro-Arc Coatings of AZ91D Magnesium Alloy

Structure and Corrosion Resistance of Electron-Beam-strengthened and Micro-Arc Oxidized Coatings on Magnesium Alloy AZ31

Corrosion and tribocorrosion resistance of MAO-based composite coating on AZ31 magnesium alloy

Corrosion Resistance of Micro- Arc Oxidation/Air Sprayed Composite Coatings on Magnesium Alloy

Corrosion Resistance of Composite Coating on Magnesium Alloy Using Combined Microarc Oxidation and Inorganic Sealing

Corrosion Resistance and In Vitro Biological Properties of TiO2 on MAO-Coated AZ31 Magnesium Alloy via ALD

Influence of Anodic Oxidation on the Organizational Structure and Corrosion Resistance of Oxide Film on AZ31B Magnesium Alloy

Microstructure and Corrosion Resistance of Micro Arc Oxidation Plus Electrostatic Powder Spraying Composite Coating on Magnesium Alloy

Corrosion and wear resistant polyp-xylene composite coating on AZ31 magnesium alloy prepared by micro-arc oxidation and vapor deposition

Influence of Cu<SUP>2+</SUP> Ions on the Corrosion Resistance of AZ31 Magnesium Alloy with Microarc Oxidation

Electrochemical Corrosion Behavior of Composite MAO/sol–gel Coatings on Magnesium Alloy AZ91D Using Combined Micro-Arc Oxidation and Sol–gel Technique

Corrosion Performance of Epoxy/btespt/mao Coating on AZ31 Alloy

Corrosion Resistance of Die Casting Magnesium Alloy Treated by Different Surface Treatment Methods

Corrosion behavior of in‐situ synthesized ZnO‐containing coatings of AZ31B magnesium alloy by micro‐arc oxidation in simulated body fluids

Effect of Graphite Content on the Conductivity, Wear Behavior, and Corrosion Resistance of the Organic Layer on Magnesium Alloy MAO Coatings