[The ACCORD Study Group. Effects of combination lipid therapy in type 2 diabetes mellitus].

Lukasz Januszkiewicz

2010-07-01

Kardiologia Polska

Abstract:

What problem does this paper attempt to address?

Micro-arc Oxidation Behaviors of AZ91D Magnesium Alloy in Different Electrolytes

LIU Bin,ZHANG Pu-liang,WANG Jin-qing,ZHANG Dong,ZHOU Jin-fang,YANG Sheng-rong

DOI: https://doi.org/10.16183/j.cnki.jsjtu.2010.01.004

2010-01-01

Abstract:Ceramic coatings were produced on AZ91D magnesium (Mg) alloy by micro-arc oxidation (MAO) technique in three different electrolytic solutions and at different oxidation times. The morpholo-gy,microstructure and composition of oxidation coatings were investigated by scanning electron microsco-py (SEM) and X-ray diffraction (XRD),respectively. Moreover,the bonding strength between ceramic coatings and AZ91D Mg alloy,as well as corrosion properties of coatings prepared in different electrolytic solutions and at different oxidation times were also evaluated with an MFT-4000 tester and a potentiody-namic polarization tester. The experimental results show that the surface morphologies and the composi-tions of oxidation coatings are different in different electrolyte systems. The corrosion resistance of AZ91D Mg alloy treated with MAO technique increases obviously. Moreover,the bonding strength between ceramic coatings and AZ91D Mg alloy oxidated for 15 min is the biggest among the prepared samples.
Study on Structure and Properties of Microarc Oxidation Coating Formed on AM60B Magnesium Alloy

LIANG Jun,GUO Bao-gang,TIAN Jun,LIU Hui-wen,ZHOU Jin-fang,XU Tao

DOI: https://doi.org/10.3969/j.issn.1005-0299.2007.03.004

IF: 1.8

2007-01-01

Materials Science and Technology

Abstract:Oxidation coatings were produced on AM60B Mg alloy substrates using the Microarc oxidation(MAO) technique in order to improve the anti-corrosion property of Mg alloy.The morphology,structure and composition of oxidation coatings were investigated by SEM and XRD.The results show that there are two layers in microarc oxidation coating,of which outer layer is loose and porous,inner layer is dense in structure.The coating is mainly composed of MgO,Mg2SiO4 and little MgAl2O4.The content of Mg2SiO4 decreases while MgO increases from outer layer to inner layer.The surface microhardness of MAO coatings is 7～8 times higher than Mg alloy substrate.The potentiodynamic polarization test in 3.5wt% NaCl solution indicates that the oxidation coating enhanced evidently the anti-corrosion of the magnesium alloy.
Preparation and properties of nano ZrO2 coating on magnesium alloy

Jie CHEN,Bing MA,Guang LIU,Ziyun ZHENG,Yu DAI,Jinming WU

DOI: https://doi.org/10.14024/j.cnki.1004-244x.20170616.002

2017-01-01

Abstract:In order to improve the wear and corrosion resistance of magnesium alloy,nano ZrO2 coating was deposited on AZ80 magnesium alloy substrate by plasma spraying technology.The SEM was used to characterize the morphology of nano feedstock powders and as-sprayed coating.The friction and wear properties of the coating were investigated by a ball on disk tribometer.The electrochemical and salt spray tests were also conducted to characterize the corrosion performance of as-sprayed coatings.The results indicate that high quality nano ZrO2 coating can be deposited on AZ80 magnesium alloy by plasma spraying technology.The bonding strength of nano ZrO2 coating is (28±6) MPa and its microhardness is (840±62)HV.The wear rate of nano ZrO2 coating is only 3.3× 10-5 mm3/(N· m),which demonstrates that the wear resistance of plasma sprayed nano ZrO2 coating is improved by one order of magnitude than that of magnesium alloy substrate.After 200 h salt spray test,the sealed nano ZrO2 coating shows no evidence of corrosion.
Effect of Several Inorganic Additives on Microstructure and Properties of Microarc Oxidation Coating on Aluminium Alloy

Changhui Zhang,ZHU Lujun,ZHANG Yuefei,MA Jie

2013-01-01

Abstract:Several inorganic additives were added into the electrolyte to improve surface properties of the ceramic coating produced by micro-arc oxidation process on aluminum alloy. The phase constituents and microstructure of the prepared MAO coating were characterized by means of X-ray diffractometer(XRD) and scanning electron microscope(SEM) respectively. The abrasive and corrosion resistance of the MAO-coating are examined by miniature wear instrument and electrochemical measurement. As adding micro- powder of alumina, potassium hydroxide, sodium pyrophosphate、sodium tungstate and nano-particles of silicon carbide in the electrolyte, the holes on MAOcoating become less and smaller, and thereby the properties of wear-resistance and corrosion resistance of the MAO-coating are enhanced.
Effect of CaO Additive on the Properties of Plasma Electrolytic Oxidation Coatings on AZ31 Mg Alloy

Maryam Rahmati,Roya Saidi,Keyvan Raeissi,Amin Hakimizad

DOI: https://doi.org/10.1007/s11665-023-09123-6

IF: 2.3

2024-01-10

Journal of Materials Engineering and Performance

Abstract:Magnesium alloys are considered a suitable candidate for body implants due to their favorable properties such as non-toxicity and favorable mechanical properties. The limitation is their high corrosion rate in the physiological environment of the body. In the present study, PEO coating was applied from a phosphate-based bath with and without CaO nanoparticles additive on AZ31 Mg alloy using unipolar and bipolar waveforms and soft sparking waveforms. The cathodic cycle led to the entry of more calcium, and a coating was formed with higher bioactivity and smaller pore size. However, the incorporation of calcium showed negative effects on the corrosion performance of the coatings in the short-term immersion (3 h) in simulated body fluid (SBF) due to the creation of a thinner coating and more micro-cracks. However, these coatings were able to show a higher barrier performance against the corrosive solution in long-term immersion (longer than 1 day), due to the higher ability of calcium phosphate formation and blocking of coating defects. By increasing the cathodic width in the bipolar waveform, high-intensity cathodic discharges happened on the coating surface, which damaged the coating and created spalling that deteriorated the coating barrier performance.

materials science, multidisciplinary
Corrosion resistance enhanced by an atomic layer deposited Al2O3 /micro-arc oxidation coating on magnesium alloy AZ31

Zuo-Jun Jiao,Chi Yu,Xue-Mei Wang,Yong-Feng Zhou,Lian Guo,Yang Xia,Bo-Cheng Zhang,Rong-Chang Zeng

DOI: https://doi.org/10.1016/j.ceramint.2023.11.309

IF: 5.532

2023-11-01

Ceramics International

Abstract:Low corrosion resistance becomes one of the major limitations for applications of magnesium (Mg) alloys. Atomic layer deposition (ALD) was applied to fabricate an Al2O3 nanofilm on micro-arc oxidation (MAO) coating of AZ31 alloys. FE-SEM, XPS, and XRD were used to characterize surface morphologies and chemical compositions of the coatings. The corrosion resistance of the MAO/Al2O3 composite coatings were evaluated via polarization, electrochemical impedance spectroscopy (EIS), and hydrogen evolution. The results demonstrated that the Al2O3 deposited for 1000 cycles completely sealed the pores of MAO coatings. And the corrosion current density of composite coatings decreased by three orders of magnitude compared to the bare MAO coatings. The formation and corrosion resistance mechanisms of the composite coating were proposed.

materials science, ceramics
Corrosion and tribocorrosion resistance of MAO-based composite coating on AZ31 magnesium alloy

Siqin Liu,Guihua Li,Yuming Qi,Zhenjun Peng,Yinping Ye,Jun Liang

DOI: https://doi.org/10.1016/j.jma.2021.04.004

IF: 11.813

2021-06-01

Journal of Magnesium and Alloys

Abstract:In this paper, a multi-functional composite coating with low friction coefficient, high wear resistance and excellent tribocorrosion resistance is fabricated on AZ31 Mg alloys by micro-arc oxidation and spray-coating methods. The microstructure, and composition of the coating are characterized by SEM, EDS, XRD, and FT-IR. Potentiodynamic polarization and EIS tests are conducted to evaluate the corrosion resistance of the composite coating. The tribocorrosion property is also studied using pin-on-disk tribometer in 3.5 wt.% NaCl solution. It is found that the composite coating possesses better long-term corrosion resistance than the single MAO coating. The tribocorrosion tests prove that the composite coating exhibits much better wear and tribocorrosion resistance than the single MAO coating and can protect the substrate from corrosion under a sliding condition.

metallurgy & metallurgical engineering
Simultaneous Improvement of Wear and Corrosion Resistance of Microarc Oxidation Coatings on ZK61 Mg Alloy by Doping with ZrO2 Nanoparticles

Chao Yang,Chenyu Wang,Zhao Shen,Liping Zhou,Liyuan Sheng,Daokui Xu,Yufeng Zheng,Paul K. Chu,Shu Xiao,Tao Ying,Xiaoqin Zeng

DOI: https://doi.org/10.1016/j.jmst.2024.10.023

2024-01-01

Abstract:The poor corrosion resistance of magnesium (Mg) and its alloys limits their application in various fields. Micro arc oxidation (MAO) coatings can improve the corrosion resistance, but the pore defects and low surface hardness make them susceptible to wear and accelerated corrosion during usage. In this study, a ZrO2 nanoparticles doped-MAO coating is prepared on the ZK61 Mg alloy by utilizing an MgF2 passivation layer to prevent ablation. The ZrO2 nanoparticles re-melt and precipitate due to local discharging, which produces evenly dispersed nanocrystals in the MAO coating. As a result, the hardness of the MAO coating with the appropriate ZrO2 concentration increases by over 10 times, while the wear rate decreases and corrosion resistance increases. With increasing ZrO2 concentrations, the corrosion potentials increase from −1.528 V of the bare ZK61 Mg alloy to −1.184 V, the corrosion current density decreases from 1.065 × 10–4 A cm–2 to 3.960 × 10–8 A cm–2, and the charge transfer resistance increases from 3.41 × 102 Ω cm2 to 6.782 × 105Ω cm2. Immersion tests conducted in a salt solution for 28 d reveal minimal corrosion in contrast to severe corrosion on the untreated ZK61 Mg alloy. ZrO2 nanoparticles improve the corrosion resistance of MAO coatings by sealing pores and secondary strengthening of the corrosion product layer.
One-step in situ growth of a simple and efficient pore-sealing coating on micro-arc oxidized AZ31B magnesium alloy

Shuaikang Yang,Chen Wang,Fuzhen Li,Naihao Liu,Putong Shi,Baojin Wang,Ruixue Sun

DOI: https://doi.org/10.1016/j.jallcom.2022.164710

IF: 6.2

2022-07-01

Journal of Alloys and Compounds

Abstract:Micro-arc oxidation (MAO) is an environmentally friendly and effective way to generate a dense and homogeneous coating with high corrosion resistance on magnesium alloys. However, the inherent porous structure of MAO coating can lead to the invasion of corrosive media to the substrate and thus reduce its corrosion resistance. Herein, we reported a novel one-step in situ growth of a pore-sealing coating on MAO-coated AZ31B alloy by hydrothermal treatment in Na3PO4 solution. The surface morphology, chemical composition and growth process of the pore-sealing coating were thoroughly studied by FESEM, XRD, FTIR and XPS. The micro-pores and micro-cracks of the MAO coating can be fully covered by the pore-sealing coating with spherical structure, which is mainly composed of Mg(OH)2 and Mg3(PO4)2. The corrosion resistance of the coatings prepared at different hydrothermal time was evaluated by electrochemical test and immersion test. Compared with the bare AZ31B substrate, the current density of the composite coating with hydrothermal treated for 18 h decreased by three orders of magnitude from 8.40 × 10−5 A/cm2 to 1.59 × 10−8 A/cm2, indicating a remarkable enhancement of the corrosion resistance. The MAO/Mg(OH)2/Mg3(PO4)2 composite coating shows high adhesive strength with the substrate, especially the outermost Mg3(PO4)2 layer with the inner Mg(OH)2 layer. In addition, the in situ growth and corrosion protection mechanisms of the pore-sealing composite coating are also proposed.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Corrosion Resistance and In Vitro Biological Properties of TiO2 on MAO-Coated AZ31 Magnesium Alloy via ALD

Xiao Han,Yan Wang,Jianxiong Ma,Xinglong Ma

DOI: https://doi.org/10.3390/coatings14091198

IF: 3.236

2024-09-19

Coatings

Abstract:The surface corrosion of magnesium alloys is effectively addressed currently by the creation of a micro-arc oxidation (MAO) ceramic layer. However, oxide film porousness restricts magnesium alloy use. Thus, this work used atomic layer deposition (ALD) to create a TiO2 coating on MAO-coated AZ31B magnesium alloy to plug micropores and increase corrosion resistance and biological characteristics. The samples were analyzed using SEM, EDS, XPS, and XRD to determine their surface appearance, chemical content, and microstructure. Micro-arc oxidation produced a 20 μm oxide coating. The TiO2 film reached 47.41 nm after 400 atomic layer deposition cycles. All corroded samples were tested for corrosion resistance using electrochemical and hydrogen evolution methods and examined for surface morphology. In vitro cell experiments examined biocompatibility. The results indicate that the TiO2 layer sealed the MAO coating's micro-pores and micro-cracks, enhanced corrosion resistance, and preserved surface morphology following corrosion. The TiO2/MAO composite coating is more biocompatible than the substrate and MAO coating. This research proposes coating AZ31B magnesium alloy for bio-remediation to increase corrosion resistance and biocompatibility.

materials science, multidisciplinary,physics, applied, coatings & films
Ag/ZIF-8/Mg-Al LDH composite coating on MAO pretreated Mg alloy as a multi-ion-release platform to improve corrosion resistance, osteogenic activity, and photothermal antibacterial properties

Wei Li,Aixian Tian,Tianlu Li,Yun Zhao,Minfang Chen

DOI: https://doi.org/10.1016/j.surfcoat.2023.129555

IF: 4.865

2023-04-27

Surface and Coatings Technology

Abstract:In this study, an Ag/zeolitic-imidazolate framework (ZIF-8)/Mg-Al layered double hydroxide (LDH) (Ag/ZIF-8/LDH) composite coating was prepared on the surface of a micro-arc oxidation (MAO)-pretreated magnesium alloy through a hydrothermal reaction with the addition of ZIF-8 nanoparticles in a hydrothermal solution. The influence of the ZIF-8 nanoparticles on the corrosion resistance, biocompatibility, antimicrobial properties, and osteogenicity of the composite coatings was systemically investigated. The results indicated that the formed Ag/ZIF-8/LDH composite nanosheets sealed the micropores and cracks in the MAO coating well, resulting in a more integrated and denser morphology. The ZIF-8-comprising composite coating exhibited better corrosion resistance in vitro. In addition, the Zn 2+ in ZIF-8 and Ag + release of the Ag nanoparticles in the coating, together with the good photothermal conversion performance of the Ag/ZIF-8/LDH coating, could quickly generate photothermal temperature under near-infrared light, to achieve a synergistic antibacterial effect. The effective antibacterial coefficients against Staphylococcus aureus and Escherichia coli were 99.8 % and 99.89 %, respectively. Additionally, the cells on the composite coating exhibited good osteogenic activity with higher alkaline phosphatase (ALP) activity because of the Zn 2+ and Mg 2+ from the LDH. This strategy may be a promising approach for post-treatment of MAO coatings to enhance protection and provide multiple functionalities for biomedical Mg alloys.

physics, applied,materials science, coatings & films
Neuropathic pain inhibitor, RAP-103, is a potent inhibitor of microglial CCL1/CCR8

M. Noda,Daichi Tomonaga,Kota Kitazono,Yusaku Yoshioka,Jiadai Liu,Jean‐Philippe Rousseau,R. Kinkead,M. Ruff,C. Pert

DOI: https://doi.org/10.1016/j.neuint.2017.12.005

IF: 4.297

2017-12-01

Neurochemistry International

Abstract:
The Effect of Yttrium Nitrate Content on the Microstructure and Properties of a Micro-Arc Oxidation Coating Prepared on a ZK61M Magnesium Alloy

Hongzhan Li,Yifei Wang,Juanjuan Geng,Shaolong Li,Yongnan Chen

DOI: https://doi.org/10.3390/coatings14010029

IF: 3.236

2023-12-25

Coatings

Abstract:To investigate the effect of the content of yttrium nitrate on the microstructure and properties of micro-arc oxidation coatings on a ZK61M magnesium alloy, this study successfully prepared a ZrO2-Y2O3-containing composite ceramic coating on a ZK61M magnesium alloy by using micro-arc oxidation (MAO) technology, adding different amounts of yttrium nitrate (0 g/L, 0.15 g/L, 0.45 g/L, and 0.75 g/L) to a zirconate electrolyte with the main components of 6 g/L of (NH4)2ZrF6, 4 g/L of NaH2PO4, 1 g/L of NaF, and a pH value of 7.5–8.0. The microstructure, phase composition, corrosion resistance, and friction coefficient of the coating were investigated using a scanning electron microscope, an energy spectrometer, an X-ray diffractometer, a photoelectron spectrometer, an electrochemical tester, and a friction and wear tester, respectively. The results showed that the composite ceramic coating was composed of c-ZrO2, t-ZrO2, m-ZrO2, MgO, Y2O3, and MgF2. Among the MAO coatings prepared in this experiment, it was when the concentration of the Y(NO3)3 was 0.75 g/L that the coating exhibited the best corrosion resistance and wear resistance. The corrosion current density (Icorr) was 1.415 × 10−8 A·cm−2, which was four orders of magnitude lower than that of the substrate. The friction coefficient and wear volume of the coating were reduced by 30.77% and 96.55% compared to the substrate, respectively.

materials science, multidisciplinary,physics, applied, coatings & films
Mechanisms of receptor-mediated modulation of transmitter release in noradrenergic, cholinergic and sensory neurones

Peter Illes

DOI: https://doi.org/10.1016/0306-4522(86)90071-0

IF: 3.708

1986-04-01

Neuroscience

Abstract:
Influence of Different Electrolyte Additives and Structural Characteristics of Plasma Electrolytic Oxidation Coatings on AZ31 Magnesium Alloy

Zhiquan Huang,Ruiqiang Wang,Xintong Liu,Dongdong Wang,Heng Zhang,Xiaojie Shen,Dejiu Shen,Dalong Li

DOI: https://doi.org/10.3390/coatings10090817

IF: 3.236

2020-08-24

Coatings

Abstract:Coatings prepared by different electrolyte additives were investigated on AZ31 magnesium alloy by plasma electrolytic oxidation. In this study, scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction analysis were employed to assess the morphologies, chemical and phase compositions of the plasma electrolytic oxidation (PEO) coatings, respectively. Furthermore, electrochemical impedance spectroscopy was used to evaluate the corrosion behavior of the composite coating. The investigation of the effect of electrolyte additives in the base electrolyte showed that the PEO specimens exhibit different surface and cross-sectional morphologies, and phase compositions. The results showed that SiO32− was conducive to the growth of the ceramic layer, and the ceramic layer developing in the electrolyte which contained AlO2− showed a typical double-layer structure. The corrosion resistance of coating formed in a phosphate bath was higher than that of the coating formed in silicate bath and coating formed in an aluminate bath. Moreover, the corrosion resistance of the coating formed in the fluoride bath was the highest.

materials science, multidisciplinary,physics, applied, coatings & films
Influence of nanoparticle additions on structure and fretting corrosion behavior of micro-arc oxidation coatings on zirconium alloy

Zheng-yang Li,Zhen-bing Cai,Xue-Jun Cui,Rui-rui Liu,Zhong-bo Yang,Min-hao Zhu

DOI: https://doi.org/10.1016/j.surfcoat.2021.126949

IF: 4.865

2021-03-01

Surface and Coatings Technology

Abstract:The micro-arc oxidation (MAO) coating with different nanoparticles (Al2O3, MoS2, CeO2, and graphene oxide (GO)) was prepared on zirconium (Zr) alloy. The surface morphology, cross-section morphology, element composition, and phase structure of different composite MAO coating were investigated. Results show the composite MAO coating consists of ZrO2 and nanoparticle, along with all the coating present a typical porous structure. The composite MAO coating is comprised of an outer porous layer and inner dense layer, and most of the nanoparticle is gathered to the outer layer. The electrochemical results demonstrate that composite MAO coating presents better corrosion protection to Zr alloy, and the MAO coating with Al2O3 shows the best corrosion resistance. Because the Al2O3 nanoparticle can stabilize the t-ZrO2 during MAO process and has a denser inner layer. Meanwhile, the nanoparticles in the coating can play the part of a barrier to the diffusion pathway of corrosion medium and restrain aggressive corrosion medium entering the Zr alloy. The fretting corrosion test shows that the MAO coating with GO has the lowest wear volume, and it has the highest material loss volume ratio of corrosion induced by wear. Because GO in MAO coating can reduce the friction by small shear force between the layers.

physics, applied,materials science, coatings & films
Microstructure and Properties of Al-Based Ceramic Coating Deposited on Magnesium Alloy Surface by Cold Spraying

Shiwei Ci,Ting Wang,Jiaqi Hu,Zonghui Cheng,Suijie Xie,Xiaoye Cai,Dingping Dong,Chao Fan,Qingwei Liu,Chenfeng Yuan,Wenbo Du,Guofeng Han,Sheng Zhu,Dexin Chen,Qiwei Wang

DOI: https://doi.org/10.3390/coatings13040779

IF: 3.236

2023-04-18

Coatings

Abstract:In this study, pure Al and Al-Al2O3 composite coatings with a low porosity and high density were prepared on magnesium alloys by cold spraying. The surface morphology, component, hardness, interfacial bonding, wear and corrosion properties were investigated. Additionally, the relationship between the interface structure and the protective coatings' quality was preliminarily established. Pure Al powder was used to create a coating with a homogeneous and dense microstructure. The hard-phase Al2O3 in the composite coatings was non-oxidized and would reduce the porosity of the coatings to improve their density and interfacial bonding by up to 55.82 MPa. The bonding mode of the pure Al coatings is primarily mechanical, whereas the bonding mode of the Al-Al2O3 mixed coatings is mechanical and metallurgical. The tough Al2O3 particles combined to form a layer of work-hardening reinforcement that resisted wear and effectively prevented it from spreading. The three Al-based coatings had excellent corrosion properties, as evidenced by their corrosion current being several orders of magnitude lower than that of the magnesium alloy substrates. The thick coating was significantly more corrosion-resistant than the thin coating and provided greater protection to the substrate. This study offers theoretical and technological assistance for the surface protection of magnesium alloy equipment in demanding conditions.

materials science, multidisciplinary,physics, applied, coatings & films
Effect of ZrSiO4 Concentration on the Microstructure and Corrosion Resistance of MAO Coatings Formed on AZ91 Magnesium Alloy

Tianlu Li,Guorui Chen,Mingzhe Xiang,Yun Zhao,Minfang Chen

DOI: https://doi.org/10.3389/fmats.2021.799780

2022-01-27

Frontiers in Materials

Abstract:As a metallic material with lightweight and high specific strength, magnesium alloy has excellent application prospects. However, the rapid corrosion rate and localized corrosion behavior of magnesium alloys limit the practical application in the automobile industry. In this study, to improve the corrosion resistance of AZ91 alloy, the film of different concentrations containing zirconium (AZR0, AZR5, AZR10, AZR15) was prepared on the surface of AZ91 alloy by micro-arc oxidation technology in the Na 2 SiO 3 -Na 3 PO 4 system. Furthermore, the influence of electrolyte composition on the corrosion resistance of the MAO film was systematically investigated. The experimental results revealed that the ZrSiO 4 particles added in the electrolyte could enter into the MAO film and ZrSiO 4 particles were also decomposed into ZrO 2 and Mg 2 Zr 5 O 11 in the process of micro-arc oxidation. More importantly, the formation of micro-cracks and other defects in the film could be reduced after this process. The addition of 15 g l −1 ZrSiO 4 in the electrolyte was contributed to the best comprehensive properties of MAO-processed AZ91 specimens, including improved Vickers hardness of 167.16 Hv, Young’s modulus of 652 MPa, and enhanced corrosion resistance ( R P = 9.82 × 10 5 Ω cm 2 ). This approach could provide the approach for developing Mg-based materials with high anticorrosion in industrial fields.

materials science, multidisciplinary
Effect of Α-Al2o3 Additive on the Microstructure and Properties of MAO Coatings Prepared on Low Carbon Steel

Zihan Zhao,Minfang Chen,Chen You,Wei Li,Di Tie,Haifeng Liu

DOI: https://doi.org/10.1016/j.jmrt.2020.02.014

IF: 6.267

2020-01-01

Journal of Materials Research and Technology

Abstract:Micro-arc oxidation (MAO) can produce metal surface coatings with excellent properties. By using appropriate auxiliary sealing technology, the micro-holes on the surface of the coatings can be reduced and the performance of the MAO coatings can be further improved. In this work, a dense and corrosion-resistant α-Al2O3 ceramic film was prepared by MAO on the surface of boron-containing low carbon steel (10B21). Based on the electrolyte including NaAlO2, NaH2PO4, Na2CO3 and Na2B4O7, we studied the effects of different concentrations of the α-Al2O3 additive (0, 1, 2, 3 and 4 g/L) in the electrolytes on the MAO layers of 10B21 and investigated the mechanisms for the effect of the added α-Al2O3. The results showed that the added α-Al2O3 particles diffused and were adsorbed into the pores in the MAO layer, and as the conversion rate from Al2O3 to the α phase in the layer increased, the pore in the films became smaller. In particular, for the α-Al2O3 concentration of 3 g/L, the lowest hole of 1∼2 μm was obtained. Since the surface of the MAO films prepared by adding α-Al2O3 had an increased higher α-Al2O3 content, excellent electrochemical corrosion performance in a 3.5% NaCl solution was obtained, and the electrochemical self-corrosion current density was 0.2 μA/cm2. After a neutral salt spray test carried out for 7 days, the corrosion rate was 20 g·m−2·d-1, and the corrosion resistance was greatly improved.
Enhancing Conductivity and Corrosion Resistance by Organic Coatings on AZ31 Magnesium Alloy Treated by Micro-Arc Oxidation

Xiuping Zhang,Lei Li,Yaozhao Mu,Yanxiang Xie,Jun Dai,Jing Shi

DOI: https://doi.org/10.1115/msec2019-2894

2019-06-10

Abstract:Abstract In this study, an organic coating, in combination of a micro-arc oxidation ceramic layer, was prepared on the surface of a magnesium alloy (AZ31) to achieve both functions of corrosion resistance and electrical conductivity. By using carbon black as conductive particles and epoxy resin as matrix, organic coatings of various weight fractions were applied on the AZ31 surface treated by micro-arc oxidation through adjusting the contents of the conductive particles and non-conductive matrix. Electrical conductivity and corrosion resistance of organic coatings were measured. The results show that the organic coatings can improve the electrical conductivity of the AZ31 material treated by micro-arc oxidation, and the conductivity changes with the ratio between the carbon black particles and non-conductive matrix. The smallest resistance value of the organic coatings reached 130Ω. Also, the organic coating can further improve the corrosion resistance of the AZ31 material. The electrochemical corrosion tests show that the corrosion potential of the AZ31 material with composite coatings was at least 0.6V higher than that of AZ31 only with micro-arc oxidation treatment.

[The ACCORD Study Group. Effects of combination lipid therapy in type 2 diabetes mellitus].

Micro-arc Oxidation Behaviors of AZ91D Magnesium Alloy in Different Electrolytes

Study on Structure and Properties of Microarc Oxidation Coating Formed on AM60B Magnesium Alloy

Preparation and properties of nano ZrO2 coating on magnesium alloy

Effect of Several Inorganic Additives on Microstructure and Properties of Microarc Oxidation Coating on Aluminium Alloy

Effect of CaO Additive on the Properties of Plasma Electrolytic Oxidation Coatings on AZ31 Mg Alloy

Corrosion resistance enhanced by an atomic layer deposited Al2O3 /micro-arc oxidation coating on magnesium alloy AZ31

Corrosion and tribocorrosion resistance of MAO-based composite coating on AZ31 magnesium alloy

Simultaneous Improvement of Wear and Corrosion Resistance of Microarc Oxidation Coatings on ZK61 Mg Alloy by Doping with ZrO2 Nanoparticles

One-step in situ growth of a simple and efficient pore-sealing coating on micro-arc oxidized AZ31B magnesium alloy

Corrosion Resistance and In Vitro Biological Properties of TiO2 on MAO-Coated AZ31 Magnesium Alloy via ALD

Ag/ZIF-8/Mg-Al LDH composite coating on MAO pretreated Mg alloy as a multi-ion-release platform to improve corrosion resistance, osteogenic activity, and photothermal antibacterial properties

Neuropathic pain inhibitor, RAP-103, is a potent inhibitor of microglial CCL1/CCR8

The Effect of Yttrium Nitrate Content on the Microstructure and Properties of a Micro-Arc Oxidation Coating Prepared on a ZK61M Magnesium Alloy

Mechanisms of receptor-mediated modulation of transmitter release in noradrenergic, cholinergic and sensory neurones

Influence of Different Electrolyte Additives and Structural Characteristics of Plasma Electrolytic Oxidation Coatings on AZ31 Magnesium Alloy

Influence of nanoparticle additions on structure and fretting corrosion behavior of micro-arc oxidation coatings on zirconium alloy

Microstructure and Properties of Al-Based Ceramic Coating Deposited on Magnesium Alloy Surface by Cold Spraying

Effect of ZrSiO4 Concentration on the Microstructure and Corrosion Resistance of MAO Coatings Formed on AZ91 Magnesium Alloy

Effect of Α-Al2o3 Additive on the Microstructure and Properties of MAO Coatings Prepared on Low Carbon Steel

Enhancing Conductivity and Corrosion Resistance by Organic Coatings on AZ31 Magnesium Alloy Treated by Micro-Arc Oxidation