Abstract:Diamond-like carbon (DLC) composite films doped with ceria were synthesized on LY-12 aluminum alloys by electrodeposition. The effects of ceria concentration on the microstructure, microhardness, wear and corrosion behavior of the composite film were investigated via Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), micro-Vickers tester, friction and wear tester and electrochemical workstation. Meanwhile, the growth mechanism of the films was explored. Results proclaimed that the loose honeycomb structure of the films was replaced by a compact granular structure as the ceria concentration increased to 1.16 ×10−3 mol/L. Raman spectra showed the typical amorphous characteristics of DLC film. The intensity ratio of G-line and D-line (ID/IG) diminished from 0.59 to 0.47, the G-line shifted to the lower frequency and the GFWHM increased, demonstrating that the CeO2/DLC composite film deposited at optimal ceria contains the higher sp3-C content. XPS analysis revealed that the binding mode of ceria is physically doped. Furthermore, the CeO2/DLC composite film exhibits superior anti-wear and anti-corrosion ability, which is primarily due to the compact structure and high microhardness.The statement of the new informationDouble Ni-Cu interlayer are prepared and CeO2 nanoparticles were successfully encapsulated in diamond-like carbon (DLC) films on LY-12 aluminum alloy substrates by electrodeposition.

Preparation and characterization of La2O3 doped diamond-like carbon nanofilms (I): Structure analysis

Mechanical properties of La2O3 doped diamond-like carbon films

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Microstructure, wear and corrosion behavior of nano-CeO2 doped diamond-like carbon (DLC) composite films

Microstructure and mechanical properties of CeO2 doped diamond-like carbon films

Deposition of nano-diamond-like carbon films by an atmospheric pressure plasma gun and diagnostic by optical emission spectrum on the process

Structural Characterization And Properties Enhancement Of Diamond-Like Carbon-Films Synthesized Under Low-Energy Ne+ Bombardment

Mechanical and tribological properties of non-hydrogenated DLC films synthesized by IBAD

Tribological Properties of Diamond-Like Carbon Films Deposited by Pulsed Laser Arc Deposition

Structural Characters and Tribological Properties of Diamondlike Carbon Films

Effect of Molybdenum Concentration and Deposition Temperature on the Structure and Tribological Properties of the Diamond-like Carbon Films

Preparation, Characterization and Tribological Properties of Diamond-Like Carbon Film on AZ31 Magnesium Alloy

Diamond-Like Carbon Thin Films Deposited On Ti6al4v Alloy Surface By Plasma Gun At Atmospheric Pressure

Evaluation of Diamond-Like Carbon Films Electrodeposited on an Al Substrate from the Liquid Phase with Pulse-Modulated Power

Multilayer Diamond‐Like Carbon Films on Monocrystalline Diamond

Structure and Mechanical Performance of Nitrogen Doped Diamond-like Carbon Films

Electrodeposition, microstructure and tribological performance of Ni/(N) incorporated diamond-like carbon films

Unusual Stress Behaviour of CeO2-doped Diamond-Like Carbon Nanofilms

Electrodeposition and microstructure of Ni and B co-doped diamond-like carbon (Ni/B-DLC) films

The properties of N-doped diamond-like carbon films prepared by helicon wave plasma chemical vapor deposition

Annealing Effect on Microstructure of Novel Ti Doped DLC Multilayer Films