Abstract:In the present work, the tribological mechanism of diamond-like carbon (DLC) films was investigated. DLC films were coated on metallic substrates (M50 steel, Ti-6Al-4V alloy and AISI 440C steel) by methane ion-beam deposition. Pin-on-disc experiments showed that the DLC films possess excellent wear resistance and exhibit low values of friction coefficient (ƒ < 0.1). The frictional response was characterized by an initial break-in period that was followed by an intermediate constant ƒ stage. The presence of a carbon transfer layer was observed on the wear scars of ball surfaces. Transmission electron microscopy and electron diffraction from the transfer layer showed that it contained a fine distribution of graphite nanoparticles (less than 5 nm) in a distorted diamond-like structure. Laser Raman spectra taken from the wear track region also revealed evidence of graphitization. In light of the present observations, the intermediate friction stage was mainly attributed to transfer layer formation. During long-duration wear experiments, a further reduction in ƒ was observed that finally reached steady state low friction (ƒ = 0.05–0.07) and an ultralow wear rate (about 1.6 × 10−9mm3 m−1 N−1). Steady state was related to the complete transformation of diamond-like to graphite-like carbon under thermal and strain effects from the repeated friction through a precursor stage involving hydrogen evolution and sp3 structure destabilization. The ultra-low wear rates were correlated to easy shear of low-strength atomic carbon interlayers in the graphitic structure.

Mechanical properties of La2O3 doped diamond-like carbon films

Preparation and characterization of La2O3 doped diamond-like carbon nanofilms (I): Structure analysis

Tribological Properties of Diamond-Like Carbon Films Deposited by Vacuum Arc

Microstructure and mechanical properties of CeO2 doped diamond-like carbon films

Tribological Properties of Diamond-Like Carbon Films Deposited by Pulsed Laser Arc Deposition

Structural Characters and Tribological Properties of Diamondlike Carbon Films

Mechanical and tribological properties of non-hydrogenated DLC films synthesized by IBAD

Effect of Molybdenum Concentration and Deposition Temperature on the Structure and Tribological Properties of the Diamond-like Carbon Films

Mechanical and Tribological Properties of Diamond-Like Carbon Films Deposited by Electron Cyclotron Resonance Microwave Plasma Chemical Vapor Deposition

Tribological Properties of Graded Metal-doped and Nanoscale Multilayered Modulation Diamond-like Carbon Films

Diamond-like Carbon Film on 20 CrNiMo Steel Prepared by Hollow-Cathode Glow Discharge

Research Progress of Metal Doped Diamond-like Carbon Films

The effects of Cr and B doping on the mechanical properties and tribological behavior of multi-layered hydrogenated diamond-like carbon films

Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions

The Impact of Dopants (B, H) on the Mechanical Behavior and Tribological Performance of DLC Film under Water Lubrication

A study of the wear mechanism of diamond-like carbon films

Microstructural evolution and tribology of Mo-doped diamond like carbon nanocomposite film

Microstructure, wear and corrosion behavior of nano-CeO2 doped diamond-like carbon (DLC) composite films

Unusual Stress Behaviour of CeO2-doped Diamond-Like Carbon Nanofilms

Frictional Properties of Element- and Compound-Doped Diamond-Like Carbon Films under Boundary Lubrication with Synthetic Base Oil

Preparation, Characterization and Tribological Properties of Diamond-Like Carbon Film on AZ31 Magnesium Alloy