Abstract:In this study, the thermal and hydraulic performances of fin array with a wedge shield installed in the bypass to alter the flow were experimentally and numerically investigated. The effect of the wedge shield inclination angle was explored at Reynolds numbers ranging from 2753 to 20,825. The mean Nusselt number and friction factor were measured in a wind tunnel with the varying volume rate of inlet air flow. The comprehensive performance evaluation criteria under identical pressure drop and identical pumping power were adopted to evaluate the effect of the wedge shield. The velocity, temperature and pressure fields, and the local Nusselt number were characterized using ANSYS Fluent. The results indicated that the heat transfer enhanced and the flow resistance increased by the wedge shield effect. At a same Reynolds number, the mean Nusselt number and friction factor reach their maximum values at θ S = 10 ∘ and θ S = 60 ∘ , respectively. According to the comprehensive performance evaluation, the applicable condition of wedge shield to enhance fin array performance was the inclination angle θ S = 135 ∘ at Reynolds number Re=3286, in which the enhancement was approximately 9% under identical pressure drop and 14% under identical pumping power. The numerical results showed that the velocity increase in fin channel and recirculation zone, caused by the blockage of the wedge shield, was the fundamental mechanism of wedge shield to enhance the heat transfer and increase the flow resistance. The velocity increase and recirculation zone, along with the low temperature region and high pressure in the entrance region of the fin channel caused by them, were all affected by the wedge shield inclination angle.

Numerical Design of an Efficient Wavy Fin Surface Based on the Local Heat Transfer Coefficient Study

Detailed Heat Transfer Measurements of Curved Fin Channels

Numerical auxiliary study of charge-air cooler design

Three-Dimensional Numerical Simulation on Laminar Heat Transfer and Fluid Flow Characteristics of Strip Fin Surface With X-Arrangement of Strips

Experimental and numerical study and comparison of performance for herringbone wavy fin and enhanced fin with convex-strips in fin-and-tube heat exchanger

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

Numerical investigations of fluid flow and heat transfer in double forward facing step in the presence of a fin

Numerical Investigation of Fluid Flow and Heat Transfer in Mini-Fin Structures

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

Numerical Investigation of Fluid Flow and Heat Transfer in High-Temperature Wavy Microchannels with Different Shaped Fins Cooled by Liquid Metal

Heat transfer and pressure drop characteristic research of sine wavy flying-wing fins

Numerical Study of Effect of Liquid Viscosity Variation on Fins Surface Performance

Numerical analysis of heat transfer and fluid flow in a three-dimensional wavy-fin and tube heat exchanger

Field Synergy Analysis of Heat Transfer Enhancement on Slit Wavy Fins

Numerical simulation of slit fin cell's flow and heat transfer

Thermo-hydraulic Performances of Internally Finned Tube with a New Type Wave Fin Arrays

Comprehensive performance investigation and optimization of a plate fin heat exchanger with wavy fins

Forced Heat Convection of Wavy Fin Channel

On the Heat Transfer Enhancement of Plate Fin Heat Exchanger

Experimental and numerical study of the thermal and hydraulic performance of fin array with wedge shield in bypass

Three dimensional numerical simulation on surface performance of a plate-fin heat exchanger.