Abstract:Recent studies in hydrometallurgy are focused on developing eco-friendly and selective leach agents such as organic acids. These agents can extract metal ions, which are usually separated through precipitation methods. When traditional methods are used, the separation is complex and time-consuming, and each metal cation is required to be isolated separately. Moreover, extracted metal salts are subsequently recombined in the regeneration of cathode materials. To simplify this, a novel simultaneous precipitation approach has been developed, allowing the separation of metal salts that can directly contribute to regenerating novel cathode materials, bypassing the need for separate isolation. This study aimed to recover cobalt, nickel, and manganese from the organic leach solution of spent lithium-ion batteries (LIBs) through co-precipitation of metal oxalates. The investigation includes the selection of organic acids and the best parameters for the leaching process, as well as testing different molar ratios of the metals M2+ (M = Co, Ni, Mn) to oxalic acid (1:3, 1:4.5, 1:6, and 1:7.5) to examine the effects of the precipitating agent on the recovery percentages of the metals. The findings indicate that 2 M citric acid and 4 vol% H2O2 is the optimal parameter in the leaching process. Meanwhile, in the co-precipitation process, an increase in the molar ratio leads to a corresponding rise in the resulting metal recoveries. At the ratio of 1:7.5, cobalt, nickel, and manganese were recovered to the extent of 99.26%, 98.93%, and 94.01%, respectively. Nevertheless, at the increased molar ratio, the co-extraction of lithium and aluminum was observed, resulting in reduced selectivity and decreased precipitate purity.

Sulfuric Acid Selective Leaching Process for Cobalt and Copper Material

Leaching cobalt from spent Li-ion battery by sulfuric acid-hydrogen peroxide

Succinic Acid-Based Leaching System: A Sustainable Process for Recovery of Valuable Metals from Spent Li-ion Batteries

Optimization Study of Operation Parameters for Extracting \hbox {Cu}^{2+} from Sulfuric Solution Containing \hbox {Co}^{2+} with LIX984N in a Laminar Microchip

Mechanochemically-aided leaching of cobalt from the cathode of spent Lithium-ion batteries

Optimization Study Of Operation Parameters For Extracting From Sulfuric Solution Containing With Lix984n In A Laminar Microchip

Optimization Study of Operation Parameters for Extracting Cu^2+ from Sulfuric Solution Containing Co^2+ with LIX984N in a Laminar Microchip

Leaching Behavior Analysis of Valuable Metals from Lithium-Ion Batteries Cathode Material

Selective Lithium Leaching from Spent Lithium-Ion Batteries Via a Combination of Reduction Roasting and Mechanochemical Activation

Study of Spent Battery Material Leaching Process

A combined process for cobalt recovering and cathode material regeneration from spent LiCoO2 batteries: Process optimization and kinetics aspects

Extraction of Valuable Metals from Waste Battery Material

Recovery of Cobalt from Cathode of Lithium-Ion Battery Using Ternary Deep Eutectic Solvent

Effective leaching of spent lithium-ion batteries using DL-lactic acid as lixiviant and selective separation of metals through precipitation and solvent extraction

Enhancement of leaching of cobalt and lithium from spent lithium-ion batteries by mechanochemical process

Study of Extraction and Purification of Ni, Co and Mn from Spent Battery Material

Kinetics of Ni and Co Recovery via Oxygen-Enriched Pressure Leaching from Waste Lithium-Ion Batteries

Recycling valuable metals from spent lithium-ion batteries by ammonium sulfite-reduction ammonia leaching

A fully discrete C0 interior penalty Galerkin approximation of the extended Fisher-Kolmogorov equation

Co-Precipitation of Metal Oxalates from Organic Leach Solution Derived from Spent Lithium-Ion Batteries (LIBs)

Characterization and Optimization of Copper-Cobalt Oxide Ores During Acid Leaching