Abstract:Since the period required for testing the atmospheric corrosion of steel is long, most studies have focused on the corrosion behavior in less than three years, making exploring long-term atmospheric corrosion particularly valuable. This study investigates the corrosion behaviors, corrosion models, and mechanical properties of Q235 welded steel pipes collapsing due to corrosion after 25-year service in an urban industrial atmospheric environment using SEM, XRD, electrochemical methods, 3-D noncontact surface profilometry, and static tensile testing. The typical morphologies of & alpha;-FeOOH, & gamma;-FeOOH, and Fe3O4 and the effect of the content of various corrosive materials on the corrosion rate of the steel pipes are identified and analyzed. Then, the influence of different corrosion degrees on the mechanical properties of the steel pipes is examined by considering the morphologies of the rust pits. The results show that the wetting-drying cycles affect the structures of the rust layers and their protective properties. The rust layers on the sheltered surface are thicker but less protective than those on the exposed surface. In the wet state, FeSO4 accelerates ion transfer, while Fe3O4 facilitates electron transfer. These processes collectively contribute to the corrosion of Q235 steel. Moreover, as the time-of-wetness of the rust layers on sheltered specimens increases, the corrosion rate of Q235 steel also accelerates. The corrosion model combines pitting and uniform corrosion and gradually changes from predominated by pitting to thickness as the corrosion degree increases. The corrosion morphology impacts the mechanical properties of the welded steel pipes, and the influences of the thickness loss and maximum rust pit depth on these properties are profound.

Failure Analysis on Steel Structure Component for Outdoor Building of Substation

Corrosion Failure Analysis of Fittings Used for Electrical Equipment in 220 kV Substation

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

The Evolution of the Corrosion Mechanism of Structural Steel Exposed to the Urban Industrial Atmosphere for Seven Years

Study On Distribution Of Steel Corrosion Products In Concrete Structures

Analysis and Repair on the Damaged Steel Structure after Fire

Corrosion Development of Carbon Steel Grids and Shear Connectors in Cracked Composite Beams Exposed to Wet-Dry Cycles in Chloride Environment.

Research on Corrosion Causes of Common Metal Material in Power Grid

CORROSION ANALYSIS OF PRESTRESSED STEEL STRANDS EMBEDDED IN DUCT GROUT FROM AN OFFSHORE BRIDGE

Failure Analysis on Corrosion of Refeed Valve Manhole Door in Circulating Fluidized Bed Boiler

Investigation of Microstructure and Corrosion Behavior of Weathering Steel in Aqueous Solution Containing Different Anions for Simulating Service Environments

Mechanical Performance of Artificially Rusted Q500MC Structural Steel Subjected to High Temperature

Failure Analysis on Water Wall Tube Burst of Heating Furnace

Bearing Capacity Analysis of Transmission Tower Structure Considering Corrosion Damage

Corrosion Failure of Fittings in Electric Power Transmission Line in Typical Industrial Areas

Investigation on Atmospheric Corrosion Behavior of Transmission Tower Materials in Simulated Industrial Environments

Study of corrosion and failure mechanism of the galvanized steel pipes of meteorological tower serviced in the South China Sea

Electron Microscopic Characterization of Corrosion Products on Surface of Galvanized Steel Sheet

Integrated analysis method of 3D corrosion evolution and mechanics of steel based on electrochemical corrosion mechanism

Corrosion Analysis of Steels in Pot-bearings at Marine Atmosphere

Corrosion Micro- and Macro-Electrochemical Behavior of Rusted Carbon Steel and Weathering Steel