Abstract:Since the period required for testing the atmospheric corrosion of steel is long, most studies have focused on the corrosion behavior in less than three years, making exploring long-term atmospheric corrosion particularly valuable. This study investigates the corrosion behaviors, corrosion models, and mechanical properties of Q235 welded steel pipes collapsing due to corrosion after 25-year service in an urban industrial atmospheric environment using SEM, XRD, electrochemical methods, 3-D noncontact surface profilometry, and static tensile testing. The typical morphologies of & alpha;-FeOOH, & gamma;-FeOOH, and Fe3O4 and the effect of the content of various corrosive materials on the corrosion rate of the steel pipes are identified and analyzed. Then, the influence of different corrosion degrees on the mechanical properties of the steel pipes is examined by considering the morphologies of the rust pits. The results show that the wetting-drying cycles affect the structures of the rust layers and their protective properties. The rust layers on the sheltered surface are thicker but less protective than those on the exposed surface. In the wet state, FeSO4 accelerates ion transfer, while Fe3O4 facilitates electron transfer. These processes collectively contribute to the corrosion of Q235 steel. Moreover, as the time-of-wetness of the rust layers on sheltered specimens increases, the corrosion rate of Q235 steel also accelerates. The corrosion model combines pitting and uniform corrosion and gradually changes from predominated by pitting to thickness as the corrosion degree increases. The corrosion morphology impacts the mechanical properties of the welded steel pipes, and the influences of the thickness loss and maximum rust pit depth on these properties are profound.

CORROSION ANALYSIS OF PRESTRESSED STEEL STRANDS EMBEDDED IN DUCT GROUT FROM AN OFFSHORE BRIDGE

Effect Of Corroded Surface Morphology On Ultra-Low Cycle Fatigue Of Steel Bridge Piers

Ultra-low Cycle Fatigue Properties and Fracture Mechanism of Corroded Structural Steel

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

Study On Distribution Of Steel Corrosion Products In Concrete Structures

Corrosion Development of Carbon Steel Grids and Shear Connectors in Cracked Composite Beams Exposed to Wet-Dry Cycles in Chloride Environment.

Fractal Characterization of Non-Uniform Corrosion of Steel Bars in Concrete Beams after Accelerated Depassivation and Seven-Year Natural Corrosion.

Corrosion Investigation on Landscape Anchor Chain in Offshore Atmosphere

Characteristics of Corrosion Products of Friction-Type High-Strength Bolted Joints of Steel Bridge: A Case Study

Probabilistic fatigue life assessment of bridge welded joints considering steel corrosion

Mill Scale and Corrosion Layer at Concrete Surface Cracking

Distribution of millscale on corroded steel bars and penetration of steel corrosion products in concrete

Influence of Stochastic Chlorine Environment on the Spatiotemporal Deterioration of Marine RC Structures

Mechanical Performance of Corroded Steel Bars in Concrete

Corrosion Analysis of Steels in Pot-bearings at Marine Atmosphere

Investigating Corrosive Environmental Factors and Corrosion Rate to Assess Vulnerable Corrosive Areas of Offshore Bridges

FINITE ELEMENT ANALYSIS OF COMPOSITE STEEL-CONCRETE BEAMS WITH STUD CORRODED

Corrosion Behavior of Rusted 550 Mpa Grade Offshore Platform Steel

Corrosion of Steel Embedded in Mortar and Concrete under Different Electrolytic Accelerated Corrosion Methods

Study of Wiring Method on Accelerated Corrosion of Steel Bars in Concrete

Data-driven Corrosion Failure Probabilistic Assessment Model for Reinforced Concrete Structures