Abstract:Since the period required for testing the atmospheric corrosion of steel is long, most studies have focused on the corrosion behavior in less than three years, making exploring long-term atmospheric corrosion particularly valuable. This study investigates the corrosion behaviors, corrosion models, and mechanical properties of Q235 welded steel pipes collapsing due to corrosion after 25-year service in an urban industrial atmospheric environment using SEM, XRD, electrochemical methods, 3-D noncontact surface profilometry, and static tensile testing. The typical morphologies of & alpha;-FeOOH, & gamma;-FeOOH, and Fe3O4 and the effect of the content of various corrosive materials on the corrosion rate of the steel pipes are identified and analyzed. Then, the influence of different corrosion degrees on the mechanical properties of the steel pipes is examined by considering the morphologies of the rust pits. The results show that the wetting-drying cycles affect the structures of the rust layers and their protective properties. The rust layers on the sheltered surface are thicker but less protective than those on the exposed surface. In the wet state, FeSO4 accelerates ion transfer, while Fe3O4 facilitates electron transfer. These processes collectively contribute to the corrosion of Q235 steel. Moreover, as the time-of-wetness of the rust layers on sheltered specimens increases, the corrosion rate of Q235 steel also accelerates. The corrosion model combines pitting and uniform corrosion and gradually changes from predominated by pitting to thickness as the corrosion degree increases. The corrosion morphology impacts the mechanical properties of the welded steel pipes, and the influences of the thickness loss and maximum rust pit depth on these properties are profound.

Corrosion Investigation on Landscape Anchor Chain in Offshore Atmosphere

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

The Evolution of the Corrosion Mechanism of Structural Steel Exposed to the Urban Industrial Atmosphere for Seven Years

Investigation of Microstructure and Corrosion Behavior of Weathering Steel in Aqueous Solution Containing Different Anions for Simulating Service Environments

Corrosion behavior of weathering steel in marine atmosphere

CORROSION ANALYSIS OF PRESTRESSED STEEL STRANDS EMBEDDED IN DUCT GROUT FROM AN OFFSHORE BRIDGE

Corrosion Behavior of High Performance Offshore Platform Steel with Chromium and Nickel Addition in the Environment Containing Chloride Ions

Corrosion form transition of mooring chain steel in simulated deep-sea environments: remarkable roles of dissolved oxygen and hydrostatic pressure

Influence of Stochastic Chlorine Environment on the Spatiotemporal Deterioration of Marine RC Structures

Characterization of Corrosion Products Formed on Q235 Carbon Steel and T2 Copper in the Antarctic Atmosphere

Corrosion Behaviors and Mechanisms of New Weathering Steel and Carbon Steel in Simulated Industrial Atmosphere

Corrosion Behavior of Rusted 550 Mpa Grade Offshore Platform Steel

Corrosion Analysis of Steels in Pot-bearings at Marine Atmosphere

Insight to atmosphere corrosion behavior of Q345NH steel in Wenchang tropical marine environment

Study on rust layers of carbon steel, weathering steel and alloy steel exposed to Shanghai atmosphere for three years

Initial Corrosion Behavior of Transmission Tower Materials in Ocean Atmosphere

Research on Atmospheric Corrosion of 45# Steel in Low-Latitude Coastal Areas of China

Corrosion behavior of low-alloy steel in tidal zone: A simulated investigation

Effect of Surface Roughness on Corrosion Resistance of Mooring Chains for Offshore Floating Photovoltaics

Experimental Investigation of Corroded CHS Tubes in the Artificial Marine Environment Subjected to Impact Loading

Characterization of the Corrosion Products Formed on Carbon Steel in Qinghai Salt Lake Atmosphere