Abstract:In this study, a kind of Ni-based superalloy specially designed for additive manufacturing (AM) was investigated. Thermo-Calc simulation and differential scanning calorimetry (DSC) analysis were used to determine phases and their transformation temperature. Experimental specimens were prepared by laser metal deposition (LMD) and traditional casting method. Microstructure, phase constitution and mechanical properties of the alloy were characterized by scanning electron microscopy (SEM), transmission scanning electron microscopy (TEM), X-ray diffraction (XRD) and tensile tests. The results show that this alloy contains two basic phases, γ/γ', in addition to these phases, at least two secondary phases may be present, such as MC carbides and Laves phases. Furthermore, the as-deposited alloy has finer dendrite, its mean primary dendrite arm space (PDAS) is about 30–45 μm, and the average size of γ' particles is 100–150 nm. However, the dendrite size of the as-cast alloy is much larger and its PDAS is 300–500 μm with secondary and even third dendrite arms. Correspondingly, the alloy displays different tensile behavior with different processing methods, and the as-deposited specimen shows better ultimate tensile stress (1,085.7±51.7 MPa), yield stress (697±19.5 MPa) and elongation (25.8%±2.2%) than that of the as-cast specimen. The differences in mechanical properties of the alloy are due to the different morphology and size of dendrites, γ', and Laves phase, and the segregation of elements, etc. Such important information would be helpful for alloy application as well as new alloy development.

A New Phase MgNi 3 Synthesized by Mechanical Alloying.

ChemInform Abstract: A New Phase MgNi3 Synthesized by Mechanical Alloying.

Direct Synthesis of MgCNi3 by Mechanical Alloying

Study on the Phase Composition of Mg2−xMxNi (m=al, Ti) Alloys

Formation of MgCNi3 and Mg–Ni Amorphous Mixture by Mechanical Alloying of Mg–Ni–C System

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

A Study on the Electronic Structure, Superconductivity, and Optical Properties of Mgcni3

The Crystal Structure of New Hydrogen Storage Mg3mni2 (m=al, Ti) Alloys

Solid state reaction and formation of nano-phase composite hydrogen storage alloy by mechanical alloying of MmNi 3.5 (CoMnAl) 1.5 and Mg

Preparation of Nb 3 Al Superconductor by Powder Metallurgy and Effect of Mechanical Alloying on the Phase Formation

Synthesis and magnetic properties of Ni3Fe intermetallic compound obtained by mechanical alloying

Microstructure and formation mechanism of Ni-Al intermetallic compounds fabricated by reaction synthesis

On the Preparation of Amorphous Mg–Ni Alloys by Mechanical Alloying

Solid-state Reaction to Synthesize Ni-Mo Metastable Alloys

First-principles study of binary and ternary phases in Mg-Gd-Ni alloys

Phase constitution, microstructure and mechanical properties of a Ni-based superalloy specially designed for additive manufacturing

Micro-alloying effects of Ni on the microstructure and mechanical properties of an Al-Zn-Mg-Cu-Sc-Zr alloy

Phase Equilibria in the Co-Mn-Ni System

Effect of Mn on eutectic phase equilibria in Al-rich Al-Ce-Ni alloys

Microstructure and mechanical properties of a novel polycrystalline Ni3Al-based intermetallic alloy

Studies on thermodynamic and kinetic and phase evolution of W-Ni-Fe powder during mechanical alloying