Abstract:Blending type of ABS with different polybutadiene rubber (PB) and polyacrylonitrile (AN) contents in SAN phase is prepared at 240 degrees C to study the effects of PB and AN content on the structure and the properties of DB/ABS blends. Different kinds of productive ABS along with the blend-type ABS are used to compare the properties of PC/ABS and DB/ABS blends comprehensively. All blends are made by melt blending for 10 min with sheer rate of 30 r/min. The result shows that, in DB/Blend-type ABS (70/30) blends, PB content exhibits significant influence on the tensile properties. Samples with 6.3 wt% of PB always show the best performance both in yield strength and elongation at break when AN content is fixed at 18 wt%, 25 wt% and 30 wt%; while increasing AN content in the sample with the same PB content would result in better blends properties even not so obvious as PB content. Scanning electron microscopy gives exactly the same trend for phase morphology with PB and AN contents, revealing best uniform scale of dispersed phase (ABS) among 0.5 - 1.2 mu m at 6.3 wt% of PB. Thermal gravimetric analysis shows that all DB/ABS blends have good thermal stability, which is not obviously affected by PB content and AN content. Single peak of glass transition shows good compatibility in the DB/ABS blends. Excellent compatibility of DB with ABS in the sample is exhibited through dynamic mechanical analysis. The glasstransition temperature of DB/ABS blends are closed to that of DB, mildly affected by PB and AN content. Besides, both blending type ABS and different kinds of productive type ABS are used to compare the properties of DB/ABS blends and traditional bisphenol-A-type PC/ABS blends. Basic laws of tensile properties in DB/ABS remain the same as in PC/ABS blends using different types of ABS.

Systhesis and Performances of Abs Resin Toughened by Sibr Via Bulk Polymerization Method-Structure, Properties and Fracture Mechnism

Upgrade SBS into vitrimers with excellent mechanical and physical properties

Preparation and Mechanical Properties of Toughened ABS Resin via Bulk Polymerization

Blends of rABS and SEBS: Influence of In-Situ Compatibilization on the Mechanical Properties

Composition Effects on Thermodynamic Properties and Interfacial Structure in Styrene-Butadiene Rubber: A Combined Experimental and Simulation Study

Morphology and mechanical properties of Acrylonitrile-styrene-acrylate toughened plastics with block copolymer chain structure: Acrylonitrile-styrene-acrylate (ASA) toughened plastics with block copolymer chain structure

Synthesis of Styrene/isoprene/butadiene Integrated Rubber with Wide Glass Transition Temperature by Reactive Extrusion

Toughening Rubber by in Situ Construction of Hierarchical Coordination Complexes with a Sulfur-Based Ionomer

A novel SBS compound via blending with PS-b-PMBL diblock copolymer for enhanced mechanical properties

A Combined Experimental and Molecular Dynamics Simulation Study on the Structures and Properties of Three Types of Styrene Butadiene Rubber

Effect of Fillers and Additives on the Properties of SBR Vulcanizates

The Influence of Polybutadiene-g-(Styrene-Acrylonitrile) Concentration on the Mechanical Properties and Flow Behavior of Acrylonitrile-Butadiene-Styrene Resin

Influence of Particle Size and Content of Agglomerated Polybutadiene on Mechanical and Rheological Properties of Acrylonitrile-Butadiene-Styrene Terpolymer

Influence of Core-Shell Particles Structure on the Morphology and Brittle-Ductile Transition of Pbt/Abs-G-Gma Blends

Structure and Properties of Isosorbide type Polycarbonate/ABS Blend

Study on structures, dynamics and mechanical properties of styrene butadiene rubber (SBR)/silica interfaces: A fully atomistic molecular dynamics

Improved Thermal Insulation and Mechanical Strength of Styrene-Butadiene Rubber through the Combination of Filled Silica Aerogels and Modified Glass Fiber

Effect of Morphology on Crack Extension Property of PC/ABS Polymer Alloy.

Effect of Abs Grafting Degree and Compatibilization on the Properties of Pbt/Abs Blends

Structural and Mechanical Properties of Styrene–butadiene Rubber/silica Composites with an Interface Modified In-Situ Using a Novel Hindered Phenol Antioxidant and Its Samarium Complex

Effect of interfacial sacrificial bonds on the vulcanization and mechanical properties of styrene butadiene rubber/talcum powder composites