Abstract:A strategy for optimizing the rolling resistance, wet skid and cut resistance of reinforced rubber simultaneously using a supramolecular filler is demonstrated. A β-alanine trimer-grafted Styrene Butadiene Rubber (A3-SBR) pristine polymer was designed and mechanically mixed with commercially available styrene butadiene rubber to help the dispersion of a β-alanine trimer (A3) supramolecular filler in the rubber matrix. To increase the miscibility of A3-SBR with other rubber components during mechanical mixing, the pristine polymer was saturated with ethanol before mixing. The mixture was vulcanized using a conventional rubber processing method. The morphology of the assembles of the A3 supramolecular filler in the rubber matrix was studied by Differential Scanning Calorimetry (DSC) and Transmission Electron Microscopy (TEM). The Differential Scanning Calorimetry study showed that the melting temperature of β-sheet crystals in the vulcanizates was around 179 °C and was broad. The melting temperature was similar to that of the pristine polymer, and the broad melting peak likely suggests that the size of the crystals is not uniform. The Transmission Electron Microscopy study revealed that after mixing the pristine polymer with SBR, some β-sheet crystals were rod-like with several tens of nanometers and some β-sheet crystals were particulate with low aspect ratios. Tensile testing with pre-cut specimens showed that the vulcanizate containing A3-SBR was more cut-resistant than the one that did not contain A3-SBR, especially at a large cut size. The rolling resistance and wet skid were predicted by dynamic mechanical analysis (DMA). DMA tests showed that the vulcanizates containing A3-SBR were significantly less hysteretic at 60 °C and more hysteretic at 0 °C based on loss factor. Overall, the "magic triangle" was expanded by optimizing the rolling resistance, wet-skid, and cut resistance simultaneously using a β-alanine trimer supramolecular filler. The Payne effect also became less severe after introducing the β-alanine trimer supramolecular filler into the system.

A Combined Experimental and Molecular Dynamics Simulation Study on the Structures and Properties of Three Types of Styrene Butadiene Rubber

Composition Effects on Thermodynamic Properties and Interfacial Structure in Styrene-Butadiene Rubber: A Combined Experimental and Simulation Study

A MD Simulation and Experimental Study

Effect of the structural characteristics of solution styrene-butadiene rubber on the properties of rubber composites

Vulcanization Modeling and Mechanism for Improved Tribological Performance of Styrene-Butadiene Rubber at the Atomic Scale

Increasing the Thermal Conductivity of Styrene Butadiene Rubber: Insights from Molecular Dynamics Simulation.

Novel Tin‐coupled Star‐shaped Medium Vinyl Butadiene Rubber. II. Vinyl Content, Molecular Weight, and Their Effects on Properties

Study on structures, dynamics and mechanical properties of styrene butadiene rubber (SBR)/silica interfaces: A fully atomistic molecular dynamics

Compressive mechanical properties of styrene-butadiene rubber under medium-low strain rates: Experiments and modeling

Morphology and Performance of Styrene Butadiene Rubber Filled with Modified Graphite Nanoplatelet and Carbon Black

Preparation, Structure, and Properties of End‐functionalized Miktoarms Star‐shaped Polybutadiene–sn–poly(styrene–butadiene) Rubber

Pyrolysis of vulcanized styrene-butadiene rubber via ReaxFF molecular dynamics simulation

Strengthening and Toughening Styrene-Butadiene Rubber by Mechanically Interlocked Cross-Links

SYNTHESIS AND PROPERTIES OF FUNCTIONALIZED STYRENE-BUTADIENE RUBBERS

Effect of Deep Eutectic Solvents on Vulcanization Kinetics and Strain-Softening Behavior of Natural Rubber/styrene-Butadiene Rubber

Effect of Physical and Chemical Crosslinking Structure on Fatigue Behavior of Styrene Butadiene Elastomer

Expanding the "Magic Triangle" of Reinforced Rubber Using a Supramolecular Filler Strategy

Exploring the Effect of Resins of Different Origin on the Structure, Dynamics and Curing Characteristics of SBR Compounds

Novel Tin-Coupled Star-Shaped Medium Vinyl Butadiene Rubber. I. Arm Number and Its Effect on Properties

Diffusion and reinforcement mechanism study of the effect of styrene/butadiene ratio on the high-temperature property of asphalt using molecular dynamics simulation

A combined molecular dynamics simulation and experimental method to study the compatibility between elastomers and resins