Abstract:To enable greater control over thermal atomic layer deposition (ALD) of molybdenum disulfide (MoS 2 ), here we report studies of the reactions of molybdenum hexafluoride (MoF 6 ) and hydrogen sulfide (H 2 S) with metal oxide substrates from nucleation to few-layer films. In situ quartz crystal microbalance experiments performed at 150, 200, and 250 °C revealed temperature-dependent nucleation behavior of the MoF 6 precursor, which is attributed to variations in surface hydroxyl concentration with temperature. In situ Fourier transform infrared spectroscopy coupled with ex situ x-ray photoelectron spectroscopy (XPS) indicated the presence of molybdenum oxide and molybdenum oxyfluoride species during nucleation. Density functional theory calculations additionally support the formation of these species as well as predicted metal oxide to fluoride conversion. Residual gas analysis revealed reaction by-products, and the combined experimental and computational results provided insights into proposed nucleation surface reactions. With additional ALD cycles, Fourier transform infrared spectroscopy indicated steady film growth after ∼13 cycles at 200 °C. XPS revealed that higher deposition temperatures resulted in a higher fraction of MoS 2 within the films. Deposition temperature was found to play an important role in film morphology with amorphous films obtained at 200 °C and below, while layered films with vertical platelets were observed at 250 °C. These results provide an improved understanding of MoS 2 nucleation, which can guide surface preparation for the deposition of few-layer films and advance MoS 2 toward integration into device manufacturing.

Thermal decomposition of Mo(CO)6 on thin Al2O3 film: A combinatorial investigation by XPS and UPS

Adsorption and Decomposition of Mo(CO)6 on Thin Al2O3 Films: Fabrication of Metallic Molybdenum Model Catalyst

Molybdenum Deposition on the Thin Alumina Film: A Combinatorial Investigation by HREELS, XPS and UPS

Preferential Occupation of Molybdenum on the Thin Alumina Film: Characterization by CO Titration

Reversible Regeneration of Molybdenum Carbonyl Species on an Alumina Thin Film

Study on the non-isothermal decomposition kinetics of AlOOH coated calcium carbonate

Comparative Investigation of Mo(CO)6 Adsorption on Clean and Oxidized Si(111) Surfaces

Multiple Coordination of CO on Molybdenum Nanoparticles: Evidence for Intermediate Mox(CO)y Species by XPS and UPS.

Preparation and Characterization of Α-Al2o3 Film by Low Temperature Thermal Oxidation of Al8Cr5 Coating

Adsorption and Reaction of CO on the Slightly Oxidized Mo(100) Surface

Carbon Monoxide Adsorption On Molybdenum Phosphides: Fourier Transform Infrared Spectroscopic And Density Functional Theory Studies

Atomic Layer Deposition and Post-Growth Thermal Annealing of Ultrathin MoO3 Layers on Silicon Substrates: Formation of Surface Nanostructures

Carbon Monoxide Oxidation over Gold Nanoparticles Deposited onto Alumina Film Grown on Mo(110) Substrate: An Effect of Charge Tunneling through the Oxide Film

EXAFS Study of Molybdenum Oxide on the Structure Al2O3

Thermal stability and decomposition paths of MoAlB ceramic

Dispersion and site-blocking effect of molybdenum oxide for CO chemisorption on the Pt(1 1 0) substrate

Co Adsorption on Highly Dispersed Mop/Al2o3 Prepared with Citric Acid

Tuning the Morphology and Composition of Ultrathin Cobalt Oxide Films Via Atomic Layer Deposition

Diffusing behavior of MoO3 on Al2O3 and SiO2 thin films

Nucleation and growth of molybdenum disulfide grown by thermal atomic layer deposition on metal oxides

Adsorption and reaction of Mo(CO)6 on chemically modified Pt(1 1 0) model surfaces