The formation mechanism and distribution of micro-aluminum oxide layer

Yunan Zhou,Jianzhong Liu,Jianru Wang,Tuanwei Xv,Daolun Liang,Kefa Cen
DOI: https://doi.org/10.1007/s10973-018-7174-2
IF: 4.755
2018-01-01
Journal of Thermal Analysis and Calorimetry
Abstract:It is of great significance to study the thermal oxidation process to understand the reaction mechanism of aluminum particle and further its applications in propellants. The physical and chemical properties of micron-aluminum particle were evaluated by scanning electron microscopy, laser particle size analyzer, X-ray diffractometer and inductively coupled plasma atomic emission spectrometer. The thermal oxidation characteristics of the sample were studied by thermal analyzer. The experimental results showed that the initial oxide thickness of the sample was about 3.96 nm, and the calculated values of the specific surface area and the active aluminum content obtained by the established mathematical model were in good agreement with the measured values. The thermal oxidation process of the sample was divided into three stages. When the temperature rose to 1100 °C, the thermal oxidation efficiency of the sample reached 98.55%. With the increase in treatment temperature, dramatic crystalline changes occurred on the surface of the sample: amorphous alumina—γ-Al 2 O 3 , α-Al 2 O 3 , and the oxide layer thickness increased from 3.96 to 5.72 nm and 31.56 nm up to 320.15 nm. When the temperature reached 700 °C, the outer surface of the oxide layer contained a small amount of α-Al 2 O 3 , while the interior consisted of a large amount of γ-Al 2 O 3 , indicating that the conversion of γ-Al 2 O 3 to α-Al 2 O 3 occurred from the inside out.
What problem does this paper attempt to address?