Abstract:We elucidate here the grain orientation/grain boundary dependence on the deformation behavior of high-Mn steel via tensile tests. The ultra-fine grained/fine grained (UFG/FG) specimen was characterized by superior strength-ductility combination as compared to the as-received specimen. In order to establish the relationship between macro and micro/nano, nanoscale deformation experiments and post-mortem microscopy of the deformed region were conducted on near-defect-free (NDF) specimen, avoiding the influence of defects. Weak anisotropy in elastic modulus and hardness was observed for NDF specimen. The modulus and hardness of grain boundary were 163 GPa and 4.32 GPa, respectively, which were relatively greater as compared to the grain interior, revealing significant grain boundary effect. Indentations in the “grain interior” had highest frequency of ratio of c/d (c - the plastic zone radius, d - distance of the indent from the grain boundary) of ∼1.2, irrespective of the orientation the indents located, implying that the ratio is a property related to the grain boundary. The higher strengthening effect at the high angle grain boundary could be attributed to higher strain and geometry necessary dislocation density surrounded the grain boundary. The strain rate sensitivity (m) and activation volume (v) obtained from nanoindentation had weak dependence on grain orientation and v was ∼5–15 b3, indicating that neither diffusional creep processes nor conventional dislocation by-pass governs plastic deformation independently. With the increase of v, the deformation mechanism transfers from dislocation slip dominant to SFs dominant, and finally twining dominant.

Three-dimensional Morphology of Grain Boundary Widmanstätten Ferrite in a Low Carbon Low Alloy Steel

Three-Dimensional Morphology and Growth Behavior of Ferrite Allotriomorphs Formed at Grain Boundary Edges

Three-Dimensional Observation and Growth Kinetics of Proeutectoid Ferrite Formed at Austenite Grain Boundary in A Low Carbon Microalloyed Steel

Serial Sectioning And 3d-Reconstruction Of Ferrite Allotriomorphs Nucleated At Grain Boundary Faces In An Fe-C-Mn Alloy

Three-dimensional analysis of ferrite allotrimorphs nucleated on grain boundary faces, edges and corners

Growth Behavior of Ferrite Allotriomorphs Nucleated on Grain Boundary Faces in a Low Carbon Steel

Three-Dimensional Morphology and Growth Behavior of Acicular Ferrite in Low Carbon Steel Weld

New Insights into Intragranular Ferrite in a Low-Carbon Low-Alloy Steel

Three-dimensional analysis of acicular ferrite in a low-carbon steel containing titanium

Three-dimensional morphology of acicular ferrite in a low carbon steel weld

3-D MORPHOLOGY OBSERVATION OF DEGENERATE FERRITE IN STEEL Fe-0.28C-3.0Mo USING SERIAL SECTIONING AND COMPUTER-AIDED RECONSTRUCTION

In Situ Observation of Acicular Ferrite Formation and Grain Refinement in Simulated Heat Affected Zone of High Strength Low Alloy Steel

Three-dimensional morphology and analysis of ferrite in steels

Probing the Impact of Grain Interior and Grain Boundaries on the Mechanical Behavior of a High-Mn Austenitic Steel

In-Situ Observations of Acicular Ferrite Growth Behavior in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels

In-situ observation on the growth of Widmanst?tten sideplates in an Fe-C-Mn steel

Multiple morphologies and twin structure generated by a definite growth behavior of grain boundary M 23 C 6 in tempered Fe–15Mn–3Al-0.7C steel

Formation of Widmanstätten Ferrite and Grain Boundary Ferrite in a Hypereutectoid Pearlitic Steel

The formation mechanisms of interlocked microstructures in low-carbon high-strength steel weld metals

Study on Three-Dimensional Morphology of Intragranular Nucleating Ferrites in Low Carbon Steels

Grain Characteristic and Texture Evolution in Friction Stir Welds of Nanostructured Oxide Dispersion Strengthened Ferritic Steel