Abstract:The solidification mechanism and segregation behavior of laser-melted Mn35Fe5Co20Ni20Cu20 was firstly investigated via in situ synchrotron x-ray diffraction at millisecond temporal resolution. The transient composition evolution of the random solid solution during sequential solidification of dendritic and interdendritic regions complicates the analysis of synchrotron diffraction data via any single conventional tool, such as Rietveld refinement. Therefore, a novel approach combining a hard-sphere approximation model, thermodynamic simulation, thermal expansion measurement and microstructural characterization was developed to assist in a fundamental understanding of the evolution of local composition, lattice parameter, and dendrite volume fraction corresponding to the diffraction data. This methodology yields self-consistent results across different methods. Via this approach, four distinct stages were identified, including: (I) FCC dendrite solidification, (II) solidification of FCC interdendritic region, (III) solid-state interdiffusion and (IV) final cooling with marginal diffusion. It was found out that in Stage I, Cu and Mn were rejected into liquid as Mn35Fe5Co20Ni20Cu20 solidified dendritically. During Stage II, the lattice parameter disparity between dendrite and interdendritic region escalated as Cu and Mn continued segregating into the interdendritic region. After complete solidification, during Stage III, the lattice parameter disparity gradually decreases, demonstrating a degree of composition homogenization. The volume fraction of dendrites slightly grew from 58.3 to 65.5%, based on the evolving composition profile across a dendrite/interdendritic interface in diffusion calculations. Postmortem metallography further confirmed that dendrites have a volume fraction of 64.7% ± 5.3% in the final microstructure.

Serial Sectioning And 3d-Reconstruction Of Ferrite Allotriomorphs Nucleated At Grain Boundary Faces In An Fe-C-Mn Alloy

Three-Dimensional Morphology and Growth Behavior of Ferrite Allotriomorphs Formed at Grain Boundary Edges

Growth Behavior of Ferrite Allotriomorphs Nucleated on Grain Boundary Faces in a Low Carbon Steel

Three-dimensional analysis of ferrite allotrimorphs nucleated on grain boundary faces, edges and corners

Three-Dimensional Observation and Growth Kinetics of Proeutectoid Ferrite Formed at Austenite Grain Boundary in A Low Carbon Microalloyed Steel

Three-dimensional Morphology of Grain Boundary Widmanstätten Ferrite in a Low Carbon Low Alloy Steel

3-D MORPHOLOGY OBSERVATION OF DEGENERATE FERRITE IN STEEL Fe-0.28C-3.0Mo USING SERIAL SECTIONING AND COMPUTER-AIDED RECONSTRUCTION

Study on Three-Dimensional Morphology of Intragranular Nucleating Ferrites in Low Carbon Steels

Structure characterization of special boundaries in Fe47Mn30Co10Cr10B3 dual-phase high-entropy alloy

Alignment of Serial Sections for 3d Microstructural Characterization of Cold Rolled Aluminum by Ebsd

In situ synchrotron diffraction and modeling of non-equilibrium solidification of a MnFeCoNiCu alloy

Three-dimensional analysis of acicular ferrite in a low-carbon steel containing titanium

Structure and Magnetic Characterization of Amorphous and Crystalline Nd–Fe–Al Alloys

A 3D Analysis of Dendritic Solidification and Mosaicity in Ni-Based Single Crystal Superalloys

3D Characterisation of the Fe-rich intermetallic phases in Al-5%Cu alloys by synchrotron X-ray microtomography and skeletonisation

Characterization of Anomalous Grains in FeCo Magnetic Alloys

In Situ Observation of Acicular Ferrite Formation and Grain Refinement in Simulated Heat Affected Zone of High Strength Low Alloy Steel

Phase field molding on the morphologies and growth kinetics of grain boundary ferrite allotriomorphs

Atomic scale study of CU clustering and pseudo-homogeneous Fe-Si nanocrystallization in soft magnetic FeSiNbB(CU) alloys

Dendritic morphology of α-Mg during the solidification of Mg-based alloys: 3D experimental characterization by X-ray synchrotron tomography and phase-field simulations

3D Characterization of a Nanostructured Al-Cu-Mg Alloy