Abstract:The ability to characterise the three-dimensional microstructure of multiphase materials is essential for understanding the interaction between phases and associated materials properties. Here, laboratory-based diffraction-contrast tomography (DCT), a recently-established materials characterization technique that can determine grain phases, morphologies, positions and orientations in a voxel-based reconstruction method, was used to map part of a dual-phase steel alloy sample. To assess the resulting microstructures that were produced by the DCT technique, an EBSD map was collected within the same sample volume. To identify the 2D slice of the 3D DCT reconstruction that best corresponded to the EBSD map, a novel registration technique based solely on grain-averaged orientations was developed -- this registration technique requires very little a priori knowledge of dataset alignment and can be extended to other techniques that only recover grain-averaged orientation data such as far-field 3D X-ray diffraction microscopy. Once the corresponding 2D slice was identified in the DCT dataset, comparisons of phase balance, grain size, shape and texture were performed between DCT and EBSD techniques. More complicated aspects of the microstructural morphology such as grain boundary shape and grains less than a critical size were poorly reproduced by the DCT reconstruction, primarily due to the difference in resolutions of the technique compared with EBSD. However, lab-based DCT is shown to accurately determine the centre-of-mass position, orientation, and size of the large grains for each phase present, austenite and martensitic ferrite. The results reveals a complex ferrite grain network of similar crystal orientations that are absent from the EBSD dataset. Such detail demonstrates that lab-based DCT, as a technique, shows great promise in the field of multi-phase material characterization.

Alignment of Serial Sections for 3d Microstructural Characterization of Cold Rolled Aluminum by Ebsd

3D Ebsd Characterization of Deformation Structures in Commercial Purity Aluminum

Segmentation of 3D EBSD data for subgrain boundary identification and feature characterization

A machine learning approach to map crystal orientation by optical microscopy

Grain Orientation Dependence of Extended Planar Dislocation Boundaries in Rolled Aluminium

An alignment algorithm using coherent twin boundaries as internal reference in 3D‐EBSD

Grain Orientation Dependence of Extended Planar Dislocation Boundaries in Cold-Rolled Polycrystalline Aluminium

The Alignment and Fusion of Multimodal 3D Serial Sectioning Datasets

Registration between DCT and EBSD datasets for multiphase microstructures

Correlated subgrain and particle analysis of a recovered Al-Mn alloy by directly combining EBSD and backscatter electron imaging

MICROSTRUCTURAL EVOLUTION OF COLUMNAR GRAIN Al DURING COLD ROLLING II. Mircoscopic Subdivision

Investigation of Medium to High Strain Deformation Microstructures Using an Automated Electron Backscattering Pattern (EBSP) System

EBSD-Based Techniques for Characterization of Microstructural Restoration Processes During Annealing of Metals Deformed to Large Plastic Strains

Evolutions of Grain Orientation and Dislocation Boundary in Aa1050 Aluminum Alloy During Cold Rolling from Low to Medium Strains

Investigation of Macroscopic Grain Sub-Division of an IF-Steel During Cold-Rolling

A large-volume 3D EBSD study on additively manufactured 316L stainless steel

3D Characterization of a Nanostructured Al-Cu-Mg Alloy

In-Situ Observations of Migration of Recrystallization Boundaries in Pure Aluminium

Dislocation Boundary Structure from Low to Medium Strain of Cold Rolling AA3104 Aluminum Alloy

Registration of Data from a Multimodal Investigation of Particle Stimulated Nucleation in Aluminum

High-resolution 3D X-ray diffraction microscopy: 3D mapping of deformed metal microstructures