Abstract:Within an austenite grain of Ti‐killed steels, the transformed microstructure can be heterogeneous. Heterogeneous microstructure has a wider grain size distribution and more large grains, hampering impact toughness. Separating acicular ferrite areas from granular bainite areas is necessary for a thorough characterization of the microstructure. Criteria for acicular ferrite identification have been proposed in this research. It is frequently found in the literature that an acicular ferrite (AF) dominant microstructure has unsteady or even low‐impact toughness. It is necessary to analyze whether they are qualified for real AF. Herein, a Ti‐killed high strength low alloy steel is prepared and subjected to heat‐affected zones simulation tests to induce various AF‐like microstructures. The morphological differences of these microstructures are compared, and their crystallographic characteristics are analyzed. It is found that even within a single prior austenite grain, the transformed microstructure can be heterogeneous. Local areas having clear lath boundaries and a chaotic or interlocking morphology should be classified as AF. Adjacent laths in these areas are from different close‐packed plane and Bain groups. In contrast, local areas having vague lath boundaries and a granular‐bainite‐like morphology should be classified as granular bainite. Neighboring laths in these areas are from the same Bain group, and a relatively low density of high‐angle grain boundaries can be found. The heterogeneous microstructure consisting of granular bainite and AF has a wider grain size distribution and a higher area fraction occupied by large grains, which can lead to the scatter of Charpy impact energy. Criteria for the identification of AF are also proposed in this research.

In Situ Observation of Acicular Ferrite Formation and Grain Refinement in Simulated Heat Affected Zone of High Strength Low Alloy Steel

In-Situ Observations of Acicular Ferrite Growth Behavior in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels

In-situ Observations of Grain Refinement by TiN Particles in the Simulated Coarse-Grained Heat-Affected Zone of a High-Strength Low-Alloy Steel

In Situ Observations of the Formation of Fine‐Grained Mixed Microstructures of Acicular Ferrite and Bainite in the Simulated Coarse‐Grained Heated‐Affected Zone

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

In Situ Observation of Austenite Grain Growth Behavior in the Simulated Coarse-Grained Heat-Affected Zone of Ti-microalloyed Steels

In-situ observation of grain refinement in the simulated heat-affected zone of high-strength low-alloy steel by Zr-Ti combined deoxidation

Effect of acicular ferrite formation on grain refinement in the coarse-grained region of heat-affected zone

Nucleation of Intragranular Acicular Ferrite in the Heat Affected Zone of Ti-Bearing Hsla Steel

In-Situ Neutron Diffraction Investigation of Austenite → Ε-Martensite → Α-Martensite Transformation and Its Dynamic Effect on Macroscopic Serration in a 13%mn Metastable Austenitic Steel

In Situ Observation of Bainite to Austenite Transformation of Microalloyed High Strength Steel During Simulated Welding Cycle

Grain Refinement in the Coarse-Grained Region of the Heat-Affected Zone in Low-Carbon High-Strength Microalloyed Steels

New Crystallography Insights of Retained Austenite Transformation in an Intercritical Annealed Quenching and Partitioning Steel

New Insights into Intragranular Ferrite in a Low-Carbon Low-Alloy Steel

The Microstructure Evolution and Influence Factors of Acicular Ferrite in Low Alloy Steels

Acicular Ferrite Identification in Heat‐Affected Zone of a Ti‐Killed High Strength Low Alloy Steel

Crystallographic characteristics of acicular ferrite nucleated on inclusions in a HSLA steel

Effects of acicular ferrites on crystallography and incomplete transformation of low-carbon low-alloy steel

In Situ Observation of Phase Transformations in the Coarse-Grained Heat-Affected Zone of P91 Heat-Resistant Steel During Simulated Welding Process

In Situ Observation of Austenite–ferrite Interface Migration in a Lean Mn Steel During Cyclic Partial Phase Transformations

Kinetics and Mechanisms of Intragranular Ferrite Nucleation on Non-Metallic Inclusions in Low Carbon Steels