Abstract:Within an austenite grain of Ti‐killed steels, the transformed microstructure can be heterogeneous. Heterogeneous microstructure has a wider grain size distribution and more large grains, hampering impact toughness. Separating acicular ferrite areas from granular bainite areas is necessary for a thorough characterization of the microstructure. Criteria for acicular ferrite identification have been proposed in this research. It is frequently found in the literature that an acicular ferrite (AF) dominant microstructure has unsteady or even low‐impact toughness. It is necessary to analyze whether they are qualified for real AF. Herein, a Ti‐killed high strength low alloy steel is prepared and subjected to heat‐affected zones simulation tests to induce various AF‐like microstructures. The morphological differences of these microstructures are compared, and their crystallographic characteristics are analyzed. It is found that even within a single prior austenite grain, the transformed microstructure can be heterogeneous. Local areas having clear lath boundaries and a chaotic or interlocking morphology should be classified as AF. Adjacent laths in these areas are from different close‐packed plane and Bain groups. In contrast, local areas having vague lath boundaries and a granular‐bainite‐like morphology should be classified as granular bainite. Neighboring laths in these areas are from the same Bain group, and a relatively low density of high‐angle grain boundaries can be found. The heterogeneous microstructure consisting of granular bainite and AF has a wider grain size distribution and a higher area fraction occupied by large grains, which can lead to the scatter of Charpy impact energy. Criteria for the identification of AF are also proposed in this research.

In Situ Observations of the Formation of Fine‐Grained Mixed Microstructures of Acicular Ferrite and Bainite in the Simulated Coarse‐Grained Heated‐Affected Zone

Formation of Bainite in Ferrous and Nonferrous Alloys Through Sympathetic Nucleation and Ledgewise Growth Mechanism

Real-time Observation of Bainite Formation at Heterogeneous Phases in a High-Strength Weathering Steel

Crystallographic characteristics of acicular ferrite nucleated on inclusions in a HSLA steel

In situ observation of bainite transformation of low carbon Si-Mn steel

Study on the formation mechanism of bainite

Mechanism of Formation and Characteristics of Microstructure of Novel Nanobainitic Steel

Acicular Ferrite Identification in Heat‐Affected Zone of a Ti‐Killed High Strength Low Alloy Steel

IN SITU OBSERVATION OF GROWTH OF BAINITE IN Fe-Ni ALLOY

The Mechanism of Bainite Transformation

In Situ Observation of Kinetic Processes of Lath Bainite Nucleation and Growth by Laser Scanning Confocal Microscope in Reheated Weld Metals

Micromechanism involved in ultrafine grained ferrite/martensite dual phase steels strengthened by nanoscale Cu-rich precipitates

Kinetics and Mechanisms of Intragranular Ferrite Nucleation on Non-Metallic Inclusions in Low Carbon Steels

Scanning tunnelling microscopy and transmission electron microscopy study of ultrafine structure and surface relief of bainite in a Cu–Zn–Al alloy

Three-dimensional morphology and crystallographic characteristics of the low-temperature bainitic microstructure in high-carbon steel

Experimental and theoretical analysis of multiphase microstructure in a newly designed MnSiCrC quenched and partitioned steel to promote bainitic transformation: The significant impact on mechanical properties

Austenite Formation and Cementite Dissolution During Intercritical Annealing of a Medium-Manganese Steel from a Martensitic Condition

Effects of acicular ferrites on crystallography and incomplete transformation of low-carbon low-alloy steel

High-Resolution Characterization of Subunits in Nanostructured Bainite in High-Carbon Silicon Steel

A route to produce toughened acicular ferrite with equivalent hardness as martensite: The combined effect of elements segregation and pre-transformed allotriomorphic ferrite

Effect of inclusions on toughness and microstructures in simulated coarse-grain heat-affected zones of Al/Ti deoxidised and Nb/V microalloyed steels