Abstract:The effects of austenitizing and austempering temperatures on the bainite transformation kinetics and the microstructural and mechanical properties of a medium-carbon high-silicon ultra-fine bainitic steel were investigated via dilatometric measurements, microstructural characterization and mechanical tests. It is demonstrated that the optimum austenitizing temperature exists for 0.3 wt.%C ultra-fine bainitic steel. Although the finer austenite grain at 950 °C provides more bainite nuclei site and form finer bainitic ferrite plates, the lower dislocation density in plates and the higher volume fraction of the retained austenite reduces the strength and impact toughness of ultra-fine steel. When the austenitizing temperature exceeds 1000 °C, the true thickness of bainitic ferrite plates and the volume fraction of blocky retained austenite in the bainite microstructure increase significantly with the increases in austenitizing temperature, which do harm to the plasticity and impact toughness. The effect of austempering temperature on the transformation behavior and microstructural morphology of ultra-fine bainite is greater than that of austenitizing temperature. The prior martensite, formed when the austempering temperature below Ms, can refine the bainitic ferrite plates and improve the strength and impact toughness. However, the presence of prior martensite divides the untransformed austenite and inhibits the growth of bainite sheaves, thus prolonging the finishing time of bainite transformation. In addition, prior martensite also strengthens the stability of untransformed austenite though carbon partition and enhances the volume fraction of blocky retained austenite, which reduces the plasticity of ultra-fine bainitic steel. According to the experimental results, the optimum austempering process for 0.3 wt. %C ultra-fine bainitic steel is through austenitization at 1000 °C and austempering at 340 °C.

Mechanism of Formation and Characteristics of Microstructure of Novel Nanobainitic Steel

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Notably Accelerated Nano-Bainite Transformation via Increasing Undissolved Carbides Content on GCr15Si1Mo Bearing Steel

Experimental and theoretical analysis of multiphase microstructure in a newly designed MnSiCrC quenched and partitioned steel to promote bainitic transformation: The significant impact on mechanical properties

High-Resolution Characterization of Subunits in Nanostructured Bainite in High-Carbon Silicon Steel

Three-dimensional morphology and crystallographic characteristics of the low-temperature bainitic microstructure in high-carbon steel

Reverse Hall–Petch Effect of Nano-Bainite in a High-Carbon Silicon-Containing Steel

Nanoprecipitation in bearing steels

Effects of austempering on the microstructure and mechanical properties of high-strength nanostructured bainitic steel containing 3.5 wt% aluminum

Controlling the Thermal Stability of a Bainitic Structure by Alloy Design and Isothermal Heat Treatment

The Microstructure Transformations and Wear Properties of Nanostructured Bainite Steel with Different Si Content

Effect of Content of Carbon and Niobium on Thermal Stability of Bainite in Microalloyed Steels

Effect of prior martensite on bainite transformation and microstructure of high-carbon nano-bainitic steel

Microstructure and mechanical properties of a novel medium Mn steel with Cr and Mo microalloying

Real-time Observation of Bainite Formation at Heterogeneous Phases in a High-Strength Weathering Steel

Role of nano-bainite laths and nanosized precipitates: Strengthening a low-alloy steel to 1870 MPa

Bainite Formation in a Carbon-Free Fe–Cr–N System

Ultra-Fine Bainite in Medium-Carbon High-Silicon Bainitic Steel

Microstructure and mechanical behavior of a novel Fe–Mn–C–Cr–Si high-manganese steel

Microstructure and Properties of a Low Carbon Bainitic Steel Produced by Conventional and Inverted Two-Step Austempering Processes