Abstract:In this study, multi-phase steel with a mixture of ferrite, bainite, retained austenite and martensite is obtained after specific heat treatments, which include intercritical annealing, isothermal holding and final quenching. The microstructural constituents and individual phase fractions are precisely quantified based on multi-scale characterizations. The focus is on bainite transformation kinetics and its impact on the microstructural evolution, which is systematically analyzed according to the assumption of displacive modeling theory. Bainite transformation begins with austenite grain-boundary nucleation and continues through autocatalytic nucleation based on nucleation kinetics of bainitic sub-units. A small discrepancy between the modeling and experimental results is indicative of carbon partitioning into austenite, which reduces the driving force and/or the rate parameter κ for bainite transformation. In addition, the continuous carbon enrichment in austenite decelerates the bainite transformation and prolongs the duration time. Moreover, the maximum carbon concentration in austenite is limited by the T0 line. Austenite with a lower carbon content but higher volume fraction will not transform to bainite at higher isothermal bainite transformation temperatures, and such mechanically unstable austenite is more likely to transform to martensite during final quenching. As a result, with increasing isothermal holding temperature, the bainite and retained austenite fractions decrease while the martensite fraction increases in the sepcimens after final quenching.

High-Resolution Characterization of Subunits in Nanostructured Bainite in High-Carbon Silicon Steel

Mechanism of Formation and Characteristics of Microstructure of Novel Nanobainitic Steel

Three-dimensional morphology and crystallographic characteristics of the low-temperature bainitic microstructure in high-carbon steel

Formation of Bainite in Ferrous and Nonferrous Alloys Through Sympathetic Nucleation and Ledgewise Growth Mechanism

Research on bainite transformation in steels

Study on Bainitic Transformation by Dilatometer and in Situ LSCM

Carbon Atom Distribution and Impact Toughness of High-Carbon Bainitic Steel

Reverse Hall–Petch Effect of Nano-Bainite in a High-Carbon Silicon-Containing Steel

The Effect of Microphases on Elongation of Nanostructured Bainitic Steels

Stm Study on Surface Relief, Ultra-Fine Structure and Transformation Mechanism of Bainite in Steels

Experimental and theoretical analysis of multiphase microstructure in a newly designed MnSiCrC quenched and partitioned steel to promote bainitic transformation: The significant impact on mechanical properties

Effect of Bainite Microstructure Types on Mechanical Properties of Low-carbon Si-Mn Steel

Effects of austempering temperature on bainitic microstructure and mechanical properties of a high-C high-Si steel

In-Situ High Temperature X-Ray Studies on Bainitic Transformation of Austempered Silicon Alloyed Steels

In Situ Observation of Bainitic Transformation Behavior in Medium Carbon Bainitic Steel

Effect of Austenite Grain Size on Transformation of Nanobainite and Its Mechanical Properties

Notably Accelerated Nano-Bainite Transformation via Increasing Undissolved Carbides Content on GCr15Si1Mo Bearing Steel

In-situ Observation of Tensile Deformation and Retained Austenite Transformation Behaviors in Carbide-Free Bainitic Steel

Real-time Observation of Bainite Formation at Heterogeneous Phases in a High-Strength Weathering Steel

In situ observation of bainite transformation of low carbon Si-Mn steel

Investigation of microstructural evolution and bainite transformation kinetics of multi-phase steel