Effect of Content of Carbon and Niobium on Thermal Stability of Bainite in Microalloyed Steels

Xiao He

2010-01-01

Abstract:Evolution of bainite in low carbon Nb-bearing microalloyed steels isothermally held below A_1 temperature was investigated by means of cold bending test, isothermal heat treatment, hardness measurement, optical microscopy and transmission electron microscopy (TEM). It is found that the evolution of bainite towards equilibrium and accompanied softening can be markedly slowed down by increasing of concentration product of carbon and niobium in the microalloyed steels. The effect works no matter whether the steel is subjected to pre-deformation. Cold deformation enhances the initial hardness of the steels while it largely accelerates softening and evolution of bainite towards equilibrium during post-heating. Almost same effects are observed for tensile strain and compressive strain. Cold deformation results in increasing of dislocation density and inhomogeneous dislocation distribution, the latter is the direct reason for pre-strain to promote microstructural evolution. The evolution of bainite during isothermal holding starts by redistribution of dislocations inside bainite laths, resulting in high density dislocations gathering along lath boundaries accompanied by occurring of zones with low density dislocations, followed by the zones with low dislocation density traversing lath boundaries and ferrite nucleating. The growth of ferrite by swallowing up the zones with high density dislocations and finally the microstructure evolves into polygonal ferrite.