Abstract:Within an austenite grain of Ti‐killed steels, the transformed microstructure can be heterogeneous. Heterogeneous microstructure has a wider grain size distribution and more large grains, hampering impact toughness. Separating acicular ferrite areas from granular bainite areas is necessary for a thorough characterization of the microstructure. Criteria for acicular ferrite identification have been proposed in this research. It is frequently found in the literature that an acicular ferrite (AF) dominant microstructure has unsteady or even low‐impact toughness. It is necessary to analyze whether they are qualified for real AF. Herein, a Ti‐killed high strength low alloy steel is prepared and subjected to heat‐affected zones simulation tests to induce various AF‐like microstructures. The morphological differences of these microstructures are compared, and their crystallographic characteristics are analyzed. It is found that even within a single prior austenite grain, the transformed microstructure can be heterogeneous. Local areas having clear lath boundaries and a chaotic or interlocking morphology should be classified as AF. Adjacent laths in these areas are from different close‐packed plane and Bain groups. In contrast, local areas having vague lath boundaries and a granular‐bainite‐like morphology should be classified as granular bainite. Neighboring laths in these areas are from the same Bain group, and a relatively low density of high‐angle grain boundaries can be found. The heterogeneous microstructure consisting of granular bainite and AF has a wider grain size distribution and a higher area fraction occupied by large grains, which can lead to the scatter of Charpy impact energy. Criteria for the identification of AF are also proposed in this research.

In-Situ Observations of Acicular Ferrite Growth Behavior in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels

In Situ Observation of Acicular Ferrite Formation and Grain Refinement in Simulated Heat Affected Zone of High Strength Low Alloy Steel

In Situ Observations of the Formation of Fine‐Grained Mixed Microstructures of Acicular Ferrite and Bainite in the Simulated Coarse‐Grained Heated‐Affected Zone

In Situ Observation of Austenite Grain Growth Behavior in the Simulated Coarse-Grained Heat-Affected Zone of Ti-microalloyed Steels

Nucleation of Intragranular Acicular Ferrite in the Heat Affected Zone of Ti-Bearing Hsla Steel

New Insights into Intragranular Ferrite in a Low-Carbon Low-Alloy Steel

In-situ Observations of Grain Refinement by TiN Particles in the Simulated Coarse-Grained Heat-Affected Zone of a High-Strength Low-Alloy Steel

Effect of acicular ferrite formation on grain refinement in the coarse-grained region of heat-affected zone

Crystallographic characteristics of acicular ferrite nucleated on inclusions in a HSLA steel

In-situ observation of grain refinement in the simulated heat-affected zone of high-strength low-alloy steel by Zr-Ti combined deoxidation

Three-Dimensional Morphology and Growth Behavior of Acicular Ferrite in Low Carbon Steel Weld

Acicular Ferrite Identification in Heat‐Affected Zone of a Ti‐Killed High Strength Low Alloy Steel

The Microstructure Evolution and Influence Factors of Acicular Ferrite in Low Alloy Steels

Kinetics and Mechanisms of Intragranular Ferrite Nucleation on Non-Metallic Inclusions in Low Carbon Steels

The formation mechanisms of interlocked microstructures in low-carbon high-strength steel weld metals

Growth Kinetics of the Ferrites Formed in Grains and at Boundaries in A Low Carbon Microalloyed Steel

MICRO MECHANICAL PROPERTIES AND STABILITY OF ACICULAR FERRITE IN A LOW CARBON MICROALLOYED STEEL

Grain Refinement in the Coarse-Grained Region of the Heat-Affected Zone in Low-Carbon High-Strength Microalloyed Steels

In Situ Observation of Bainite to Austenite Transformation of Microalloyed High Strength Steel During Simulated Welding Cycle

Effects of acicular ferrites on crystallography and incomplete transformation of low-carbon low-alloy steel

In Situ Observation and Growth Kinetics of Bainite Laths in the Coarse-Grained Heat-Affected Zone of 2.25Cr-1Mo Heat-Resistant Steel During Simulated Welding