Abstract:Acicular ferrite (AF) has been regarded as the optimal microstructure in steel welds and heat affect zones (HAZs), because of its superior combination of strength and toughness. Although various aspects of AF have been investigated, the crystallographic characteristics of AF, including orientation relationship, variant selection and variant pairing, are still not fully studied. In this research, a Ti-deoxidized high strength low alloy steel was prepared and subjected to HAZ thermal cycle simulation tests to attain AF microstructure. Optical micrographs were obtained and EBSD mappings of AF microstructures were conducted. Through crystallographic analysis, the orientation relationship between AF and austenite was found close to that of bainite transformed at a high temperature (580 °C). In the AF microstructure, all 24 variants are formed and variant selection is nearly random. Compared with bainite, the variant pairing of AF is more random despite the slight favour of certain variant pairs. Most of the adjacent AF laths are from different close-packed plane (CP) groups, leading to the classic interlocking morphology. Meanwhile, a large number of neighbouring AF laths belong to different Bain groups, resulting in a high density of high angle grain boundaries (HAGBs). Intragranular nucleation of primary AF laths on inclusions contributes both to the high HAGB density and to the interlocking morphology of AF, while the sympathetic nucleation of secondary AF laths only contributes to the latter. These results suggest that to increase the HAGB density in AF, promoting the intragranular nucleation on inclusions is more important than enhancing the sympathetic nucleation.

New Insights into Intragranular Ferrite in a Low-Carbon Low-Alloy Steel

Kinetics and Mechanisms of Intragranular Ferrite Nucleation on Non-Metallic Inclusions in Low Carbon Steels

In-Situ Observations of Acicular Ferrite Growth Behavior in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels

Intragranular Ferrite and Microstructure Control in Low Carbon Microalloyed Steels

Microstructure Evolution In A Low Carbon Nb-Ti Microalloyed Steel

In Situ Observation of Acicular Ferrite Formation and Grain Refinement in Simulated Heat Affected Zone of High Strength Low Alloy Steel

Intragranular Ferrite Formation Mechanism and Mechanical Properties of Non-quenched-and-tempered Medium Carbon Steels

Ferrite Formation Dynamics and Microstructure Due to Inclusion Engineering in Low-Alloy Steels by Ti2O3 and TiN Addition

The Mechanism of Intragranular Ferrite Nucleation on Inclusion in Steel

Growth Kinetics of the Ferrites Formed in Grains and at Boundaries in A Low Carbon Microalloyed Steel

Study on Three-Dimensional Morphology of Intragranular Nucleating Ferrites in Low Carbon Steels

Nucleation and Three-Dimensional Morphology of Intragranular Ferrite in A Vanadium Microalloyed Steel

Investigation of Massive Ferrite in an Interstitial-Free Steel

The formation mechanisms of interlocked microstructures in low-carbon high-strength steel weld metals

Nucleation of Intragranular Acicular Ferrite in the Heat Affected Zone of Ti-Bearing Hsla Steel

New Crystallography Insights of Retained Austenite Transformation in an Intercritical Annealed Quenching and Partitioning Steel

Intragranular ferrite formed in association with inclusions in a vanadium microalloyed steel

Crystallographic characteristics of acicular ferrite nucleated on inclusions in a HSLA steel

The Microstructure Evolution and Influence Factors of Acicular Ferrite in Low Alloy Steels

Influence of Inclusions on the Nucleation of Acicular Ferrites in a Ti–Zr‐Bearing Steel

Influence of Prior Austenite Deformation and Non-Metallic Inclusions on Ferrite Formation in Low-Carbon Steels