Abstract:Stainless steels with excellent hardness and corrosion resistance performance have been widely used in industrial production. Ternary Fe-Cr-Ni alloys, as a model alloy of nickel chromium stainless steels, are of great importance in the fields of material science. Under non-equilibrium solidification condition, alloys may have new microstructure and improved performance. In this paper, two liquid ternary Fe-Cr-Ni alloys are deeply undercooled and rapidly solidified in a 3-m drop tube to investigate the microstructure evolution and solute distribution of alloy droplets with different sizes. In the drop tube experiments, the Fe-Cr-Ni alloy samples with a mass of 1.5 g are placed in a phi 16 mm x 150 mm quartz tube with a 0.5-mm-diameter orifice at its bottom and heated by induction heating device in a high vacuum chamber. Then the samples are melted and overheated to 200 K above their liquidus temperatures for several seconds. The alloy melt is ejected out of the small orifice and dispersed into numerous droplets after adding high pressure helium gas flow. The alloy droplets with diameters ranging from 68 mu m to 1124 mu m are achieved. After experiments, the alloy droplets with different sizes are mounted respectively. Then they are polished and etched. The drop tube technique provides an efficient way to study the rapid solidification mechanism of alloys. Besides the experiments, the dendrite growth velocities of primary phase in two Fe-Cr-Ni alloys are calculated theoretically using the modified LKT/BCT model. As droplet size decreases, both cooling rate and undercooling increase exponentially and the morphologies of two alloys become well refined. Under the near-equilibrium solidification condition with a cooling rate of 10 K/min, both alloys consist of coarse lath-like alpha phase. After rapid solidification of Fe81.4Cr13.9Ni4.7 alloy droplets during free fall, the microstructure presents a lath-like a phase, resulting from the solid-solid phase transition. As undercooling increases, the primary delta phase is converted from the coarse dendrite with long trunk into equiaxed grain. For Fe81.4Cr4.7Ni13.9 alloy, the microstructure is composed of alpha phase grains. The transition of primar gamma phase from coarse dendrite with long trunk to refined equiaxed grain occurs as the undercooling increases. Meanwhile, both dendrite trunk length and secondary dendrite arm spacing decrease drastically, suggesting that the rapid solidification is the main reason for grain refinement. Moreover, the relative segregation degree of solute Cr and Ni inside alpha phase grain also decreases obviously with the increase of undercooling, and the microsegregation of Ni is more remarkable than that of Cr. This suggests that the high cooling rate and undercooling cause the solute to be distributed evenly. Compared with that of gamma phase, the dendrite growth velocity of delta phase is large and its dendrite tip radius is small. The two phase transform from solute diffusion controlled growth into thermal diffusion controlled growth as undercooling increases to 8 K. When undercooling is larger than 8 K and within the experimental undercooling range, the dendrite growth of both Fe-Cr-Ni alloys is controlled by thermal diffusion.

In situ synchrotron diffraction and modeling of non-equilibrium solidification of a MnFeCoNiCu alloy

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

A Comparative Study of Dendritic Growth Within Undercooled Liquid Pure Fe and Fe50Cu50 Alloy

Liquid Phase Separation and Rapid Dendritic Growth of Highly Undercooled Ternary Fe62.5cu27.5sn10 Alloy

Influences of Solution Cooling Rate on Microstructural Evolution of a Multiphase Ni3Al-based Intermetallic Alloy

Solidification behaviour of undercooled Co–Cu alloys showing a metastable miscibility gap

Non-equilibrium solidification of bulk undercooled Ni–P eutectic alloys

Rapid dendritic solidification and structure hardening mechanism of substantially undercooled quaternary nickel alloys

Rapid Solidification and Dendrite Growth of Ternary Fe-Sn-Ge and Cu-Pb-Ge Monotectic Alloys

Dual Solidification Mechanisms of Liquid Ternary Fe-Cu-Sn Alloy

Dendritic Solidification of Highly Undercooled Dilute Alloys

Metastable Phase Separation And Rapid Solidification Of Undercooled Co40fe40cu20 Alloy

Exploring growth characteristics of intermetallic compound in ternary Fe-Co-Si alloy

Rapid dendrite growth mechanism and solute distribution in liquid ternary Fe-Cr-Ni alloys

Fast Synchrotron X-Ray Tomographic Quantification of Dendrite Evolution During the Solidification of Mg-Sn Alloys

Computer Modeling of the Evolution of Dendrite Microstructure in Binary Alloys During Non-isothermal Solidification

In Situ and Real-Time Observation of the Solidification Process of Al-20 Mass%Cu Alloy by Synchrotron X-Ray Radiography

Dynamic evolution of microstructure morphology in thin-sample solidification: Deep learning assisted synchrotron X-ray radiography

Rapid Solidification of a FeSi Intermetallic Compound in Undercooled Melts: Dendrite Growth and Microstructure Transitions

Equiaxed dendritic growth in nearly isothermal conditions: A study combining in situ and real-time experiment with large-scale phase-field simulation

Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy