Abstract:Acicular ferrite (AF) has been regarded as the optimal microstructure in steel welds and heat affect zones (HAZs), because of its superior combination of strength and toughness. Although various aspects of AF have been investigated, the crystallographic characteristics of AF, including orientation relationship, variant selection and variant pairing, are still not fully studied. In this research, a Ti-deoxidized high strength low alloy steel was prepared and subjected to HAZ thermal cycle simulation tests to attain AF microstructure. Optical micrographs were obtained and EBSD mappings of AF microstructures were conducted. Through crystallographic analysis, the orientation relationship between AF and austenite was found close to that of bainite transformed at a high temperature (580 °C). In the AF microstructure, all 24 variants are formed and variant selection is nearly random. Compared with bainite, the variant pairing of AF is more random despite the slight favour of certain variant pairs. Most of the adjacent AF laths are from different close-packed plane (CP) groups, leading to the classic interlocking morphology. Meanwhile, a large number of neighbouring AF laths belong to different Bain groups, resulting in a high density of high angle grain boundaries (HAGBs). Intragranular nucleation of primary AF laths on inclusions contributes both to the high HAGB density and to the interlocking morphology of AF, while the sympathetic nucleation of secondary AF laths only contributes to the latter. These results suggest that to increase the HAGB density in AF, promoting the intragranular nucleation on inclusions is more important than enhancing the sympathetic nucleation.

Three-Dimensional Morphology and Growth Behavior of Acicular Ferrite in Low Carbon Steel Weld

Three-dimensional morphology of acicular ferrite in a low carbon steel weld

Three-dimensional analysis of acicular ferrite in a low-carbon steel containing titanium

In-Situ Observations of Acicular Ferrite Growth Behavior in the Simulated Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steels

The formation mechanisms of interlocked microstructures in low-carbon high-strength steel weld metals

Microstructural Analysis of Weld Metal Microstructures in a Low Carbon High Strength Microalloyed Steel

Three-dimensional Morphology of Grain Boundary Widmanstätten Ferrite in a Low Carbon Low Alloy Steel

Three-dimensional morphology and analysis of ferrite in steels

Three-Dimensional Observation and Growth Kinetics of Proeutectoid Ferrite Formed at Austenite Grain Boundary in A Low Carbon Microalloyed Steel

In Situ Observation of Acicular Ferrite Formation and Grain Refinement in Simulated Heat Affected Zone of High Strength Low Alloy Steel

3-D MORPHOLOGY OBSERVATION OF DEGENERATE FERRITE IN STEEL Fe-0.28C-3.0Mo USING SERIAL SECTIONING AND COMPUTER-AIDED RECONSTRUCTION

New Insights into Intragranular Ferrite in a Low-Carbon Low-Alloy Steel

Growth Behavior of Ferrite Allotriomorphs Nucleated on Grain Boundary Faces in a Low Carbon Steel

Crystallographic characteristics of acicular ferrite nucleated on inclusions in a HSLA steel

MICRO MECHANICAL PROPERTIES AND STABILITY OF ACICULAR FERRITE IN A LOW CARBON MICROALLOYED STEEL

Study on Three-Dimensional Morphology of Intragranular Nucleating Ferrites in Low Carbon Steels

Nucleation of Intragranular Acicular Ferrite in the Heat Affected Zone of Ti-Bearing Hsla Steel

Ex-situ observation of ferrite grain growth behavior in a welded 9Cr-1Mo-V-Nb steel during aging at 740 °C

Three-Dimensional Morphology and Growth Behavior of Ferrite Allotriomorphs Formed at Grain Boundary Edges

Effect of acicular ferrite formation on grain refinement in the coarse-grained region of heat-affected zone

Effects of acicular ferrites on crystallography and incomplete transformation of low-carbon low-alloy steel