Abstract:Due to the pristine interface of the 2D/3D face-tunneling heterostructure with an ultra-sharp doping profile, the 2D/3D tunneling field-effect transistor (TFET) is considered as one of the most promising low-power devices that can simultane-ously obtain low off-state current (IOFF), high on-state current (ION) and steep subthreshold swing (SS). As a key element for the 2D/3D TFET, the intensive exploration of the tunnel diode based on the 2D/3D heterostructure is in urgent need. The transfer technique composed of the exfoliation and the release process is currently the most common approach to fabri-cating the 2D/3D heterostructures. However, the well-established transfer technique of the 2D materials is still unavailable. Only a small part of the irregular films can usually be obtained by mechanical exfoliation, while the choice of the chemical exfoliation may lead to the contamination of the 2D material films by the ions in the chemical etchants. Moreover, the defor-mation of the 2D material in the transfer process due to its soft nature also leads to the nonuniformity of the transferred film, which is one of the main reasons for the presence of the wrinkles and the stacks in the transferred film. Thus, the large-scale fabrication of the high-quality 2D/3D tunnel diodes is limited. In this article, a comprehensive transfer technique that can mend up the shortages mentioned above with the aid of the water and the thermal release tape (TRT) is proposed. Based on the method we proposed, the MoS2/Si tunnel diode is experimentally demonstrated and the transferred monolayer MoS2 film with the relatively high crystal quality is confirmed by atomic force microscopy (AFM), scanning electron microscopy (SEM), and Raman characterizations. Besides, the prominent negative differential resistance (NDR) effect is observed at room temperature, which verifies the relatively high quality of the MoS2/Si heterojunction. The bilayer MoS2/Si tunnel diode is also experimentally fabricated by repeating the transfer process we proposed, followed by the specific analysis of the electrical characteristics. This study shows the advantages of the transfer technique we proposed and indicates the great application foreground of the fabricated 2D/3D heterostructure for ultralow-power tunneling devices.

A High Performance Bi-Directional Super-MIM Diode with Symmetrical and Shift-Free I-V Characteristics

A Novel Self-Aligned Bidirectional MIM Diode with Transparent Junctions for AM-LCD's

High Frequency Ni-NiO-Ag Metal-Insulator-Metal Tunnel Diodes Fabricated via Anodic Aluminum Oxide Templates

MoS2/Si Tunnel Diodes Based on Comprehensive Transfer Technique

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Characteristics of Electron Emission of Al-Al2o3-Ti/Au Diode with A New Double-Layer Insulator

Oxide-Polymer Heterojunction Diodes with a Nanoscopic Phase-Separated Insulating Layer.

MOS-controlled Diode (MCD) on Silicon-on-insulator (SOI)

Bifunctional Device with High‐Energy Storage Density and Ultralow Current Analog Resistive Switching

The Electrical Property Modulation of Insulator in Metal–insulator–semiconductor–metal

Combinatorial Optimization of Metal‐Insulator‐Insulator‐Metal (MIIM) Diodes With Thickness‐Gradient Films via Spatial Atomic Layer Deposition

A Mim Device Featuring Both Rram and Diode Behavior

An A-Si Thin Film Diode with Big Current and High On/off Ratio

A Mos-Controlled Diode (mcd) for Power Integrated Circuits

Dielectric/semiconductor interfacial doping to develop solution processed high performance 1 V ambipolar oxide-transistor and its application as CMOS inverter

High-Performance MIM Capacitors for a Secondary Power Supply Application

2D MXene–Molecular Hybrid Additive for High‐Performance Ambipolar Polymer Field‐Effect Transistors and Logic Gates

Homogeneous 2D MoTe2 CMOS Inverters and P-N Junctions Formed by Laser-Irradiation-Induced P-Type Doping.

Mix‐mode Forward‐biased Diode with Low Clamping Voltage for Robust ESD Applications

Enhanced Current Density and Asymmetry of Metal-Insulator-Metal Diodes Based on the Self-Assembly of Pt Nanoparticles for Optical Rectennas

Performance-Tunable MoS2 Homojunction Photodiode Based on Different Built-In Electric Field