Abstract:Aluminium nitride (AlN) is an important technical ceramic with outstanding strength and thermal conductivity that has important applications for advanced heat sink materials and as a reinforcement for metal-based composites. In this study, we report a novel, straightforward and low-cost method to prepare AlN powder using a vacuum tube furnace for the direct nitridation of loose aluminium powder at low temperatures (down to 500 ∘C) under flowing high-purity nitrogen. Small amounts of magnesium powder (1 wt.%), combined with aluminium, promote nitridation. Here, we characterise the effects of time (up to 12 h) and temperature (490 to 560 ∘C) on nitridation with the aim to establish an effective regimen for the controlled synthesis of an aluminium nitride reinforcement powder for the production of metal matrix composites. The extent of nitridation and the morphology of the reaction products were assessed using scanning electron microscopy and X-ray diffraction analyses. AlN was detected for all nitriding temperatures ≥ 500 ∘C, with the highest yields of 80% to 85% obtained at 530 ∘C for times ≥ 1 h. At this temperature, nitridation proceeded rapidly, and there was extensive agglomeration of the reaction products making it difficult to reprocess into powder. At lower temperatures around 510 ∘C, a relatively high proportion of AlN was attained (>73% after 6 h) while retaining excellent friability so that it could be manually reprocessed to powder. The synthesised reinforcement consisted of micro- or nano-crystalline AlN comingled with metallic aluminium. The ratio of AlN and metallic aluminium can be readily controlled by varying the nitriding temperature. This provides a flexible and accessible method for the production of AlN-reinforcement powders suited to the production of metal matrix composites.

Crucible Materials for Growth of Aluminum Nitride Crystals

The Durability of Various Crucible Materials for Aluminum Nitride Crystal Growth by Sublimation

Growth of Spontaneous Nucleation AlN Crystals by Al-Base Alloy Evaporation in Nitrogen Atmosphere

Growth of Low-Defect SiC and AlN Crystals in Refractory Metal Crucibles

Chemical compatibility of a TiAl-Nb melt with oxygen-free crucible ceramics made of aluminum nitride

Effect of Various Crucibles for High Quality AIN Crystal Growth on SiC Seed by PVT Method

Anti-corrosion AlN ceramic crucible with excellent thermal shock resistance for induction melting of TiAl alloy

Self-propagating high-temperature synthesis of AlN in a graphite crucible in air by mechanical activation

Effect of thermal environment evolution on AlN bulk sublimation crystal growth

Impacts of Temperature and Time on Direct Nitridation of Aluminium Powders for Preparation of AlN Reinforcement

Thermal stability and selective nitridation of Cr2AlC in nitrogen at elevated temperatures

Optimizing crucible geometry to improve the quality of AlN crystals by the physical vapor transport method

Sublimation Growth of Aluminum Nitride on Silicon Carbide Substrate with Aluminum Nitride–silicon Carbide Alloy Transition Layer

Influence of Temperature Field Distribution on the Growth of Aluminum Nitride Crystal by Simulation Technology

Bulk AlN crystal growth: self-seeding and seeding on 6H-SiC substrates

Oxygen reduction through specific surface area control of AlN powder for AlN single-crystal growth by physical vapor transport

Synthesis of AlN particles via direct nitridation in a drop tube furnace

Low temperature growth of c-axis oriented AlN films on γ-LiAlO2 by radio frequency magnetron sputtering

Seeded Growth of AlN Crystals on Nonpolar Seeds Via Physical Vapor Transport

The Effect of Aluminum Nitride-Silicon Carbide Alloy Buffer Layers on the Sublimation Growth of Aluminum Nitride on Sic (0001) Substrates