Abstract:We demonstrated an all-fiber comb filter that can continuously tune the wavelength for four switchable wavelength spacings. The comb filter consists of a fiber loop mirror (FLM) that is inserted with three polarization maintaining fibers (PMFs) and three polarization controllers (PCs). The transmission characteristics of the comb filter was theoretically analyzed. The output characteristics of the comb filters shows a dependence of the orientation angles of the PCs. With the angles being optimally set, the comb filter with four different wavelength spacings can be achieved. The wavelength continuously tunable and wavelength spacing variable mechanisms are elaborated. The three PCs are employed to enable the tunable and switchable functions. The two PCs between the PMFs serve as a polarization rotator to align the birefringent axes of the PMFs for varying the wavelength spacing while the PC adjacent to the optical coupler can be used for wavelength tuning function. When the two quarter-waveplates (QWPs) of the PC are optimally set at π/4 and - π/4, the half-waveplate (HWP) acts as a wavelength tuning element, and when the QWPs are set at zero degrees, the HWP serves as an amplitude tuning element. The center wavelength of the comb filter could be linearly tuned with the rotation angle of the HWP, and a π/2 change in the rotation angle leads to a wavelength change in one free-spectral-range (FSR). A π/4 change in the rotation angle could bring the normalized peak transmission from its maximum at 1 to minimum at 0. The proposed tunable technique has been verified by our experimental results. We experimentally demonstrated the comb filters can switch among FSRs of 0.75 nm, 1.01 nm, 1.51 nm, and 3.1 nm with tunable functions.

Comb filter based on an all polarization maintaining fiber loop and its applications

Wavelength-Division Multiplexed Thin-Film Filters Used in Tilted Incident Angles of Light

Polarization-independent fiber filter with an all-polarization-maintaining fiber loop for tunable fiber lasers

Wavelength continuously tunable and wavelength spacing variable comb filter based on a High-Birefringence fiber loop mirror

Fibre-optic Comb Filter with Tunable Central Wavelength and Channel Isolation at Sub-Microsecond Speed

Wavelength-Tunable First-Order Narrowband Fiber Comb Filter Incorporating All-Quarter-Wave Polarization Transformation

Theory and Experiment of Flat-Top All-Fiber Comb Filter Based on Two High Birefringence Fiber Sagnac Loop Filters

Multi-wavelength Fiber Source with Equal Frequency Spacing

Tunable Fiber Ring Laser Employing a Sagnac Interferometric Filter

Tunable and Channel Spacing Precisely Controlled Comb Filters Based on the Fused Taper Technology.

In-line flat-top comb filter based on a cascaded all-solid photonic bandgap fiber intermodal interferometer.

Single-Polarization Coupler Based on Air-Core Photonic Bandgap Fibers and Implications for Resonant Fiber Optic Gyro

Fiber laser with dual-channel and a selectable comb filter based on Vernier effect of parallel-connected two Mach–Zehnder interferometers

Integrated Polarization Compensator for WDM Waveguide Demultiplexers

Integrated Broadband Filter with Sharp Transition Edges Based on SiN and SiON Composite Waveguide Coupler

Narrow-Band Add-Drop Filter Based on Phase-Modulated Grating-Assisted Contra-Directional Couplers

Polarization Maintain Fiber Couplers with Novel Transmission Characteristics

TUNABLE FIBER FABRY-PEROT FILTER FOR OPTICAL CARRIER-SUPPRESSION AND SINGLE-SIDEBAND MODULATION IN RADIO OVER FIBER LINKS

A reconfigurable photonic microwave channelized receiver based on an optical comb

All-fiber polarization-manageable directional couplers

Short coherent interferometry of polarize coupling in birefringent waveguide