Abstract:A single-polarization (SP) coupler based on air-core photonic bandgap fibers (PBFs) is proposed and numerically simulated. The physical mechanism is the decoupling phenomenon occurring at special separations between the cores of the dual-core PBFs called decoupling points. The coupling length of one polarization in the coupler tends to be infinite while the coupling length of other polarization remains in normal level. The coupling ratio for the primary polarization can vary by adjusting the length of the coupler since the other polarization is always decoupled out at any length of the coupler. When this novel SP coupler is incorporated into a PBFs based fiber ring resonator, its unique polarization property is theoretically simulated. In this full-PBFs configuration, the SP coupler functions as the power splitter and the polarizer simultaneously. By the finite element method, the feasibility of the SP coupler to filter the secondary eigenstate of polarization (ESOP) propagating in the resonator is proved. And the performance of the SP coupler to suppress the temperature-related polarization fluctuation in the resonant fiber optic gyro is promised to be more significant to the in-line polarizer integrating in the resonator. Furthermore, the mechanism of decoupling phenomenon in the SP coupler and the influence of polarization-axis angular misalignment are discussed. In conclusion, an optimized SP coupler can couple the primary ESOP properly, and a polarization extinct ratio larger than 30 dB can be achieved within the angular misalignment of 0.9 degree. The aforementioned unique properties make this novel SP coupler attractive for the resonant fiber optic gyro.

All-fiber polarization-manageable directional couplers

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Mode Couplers and Converters Based on Dual-Core Hollow-Core Photonic Bandgap Fiber

Directional Couplers Operated by Resonant Coupling in All-Solid Photonic Bandgap Fibers.

Polarization Maintain Fiber Couplers with Novel Transmission Characteristics

Single-Polarization Coupler Based on Air-Core Photonic Bandgap Fibers and Implications for Resonant Fiber Optic Gyro

Full-Vectorial Mode Coupling in Optical Fibers

Low-Loss All-Fiber Mode Multiplexers for Weakly-Coupled 4-Mode Fiber

Semi-reciprocal polarization maintaining fibre coupler with distinctive transmission characteristics

Symmetric polarization insensitive directional couplers fabricated by femtosecond laser waveguide writing

Polarization based modulation of splitting ratio in femtosecond laser direct written directional couplers

3D Polymer Directional Coupler for On-Board Optical Interconnects at 1550 Nm.

PCF-based Polarization Splitters with Simplified Structures

Coupling Analysis of Non-Circular-symmetric Modes and Design of Orientation-Insensitive Few-Mode Fiber Couplers

Complete Polarization Control for a Nanofiber Waveguide Using Directional Coupling

Design of a single-polarization single-mode photonic crystal fiber double-core coupler

Multi-wavelength Oscillating and Transverse Mode Switching in an All Few-Mode Fiber Laser Based on Polarization Manipulation

A Novel Polarization Splitter Based on the Photonic Crystal Fiber with Nonidentical Dual Cores

Laser-written polarizing directional coupler with reduced interaction length

Ultracompact wavelength and polarization directional coupler based on nanowire waveguides

Bifunctional Fiber Meta-Tip for Polarization-Selective Optical Interconnect