Abstract:Context. Narrow-band interference filters can be tuned toward shorter wavelengths by tilting them from the perpendicular to the optical axis. This can be used as a cheap alternative to real tunable filters, such as Fabry-Pérot interferometers and Lyot filters. At the Swedish 1-m Solar Telescope, such a setup is used to scan through the blue wing of the Ca II H line. Because the filter is mounted in a converging beam, the incident angle varies over the pupil, which causes a variation of the transmission over the pupil, different for each wavelength within the passband. This causes broadening of the filter transmission profile and degradation of the image quality. Aims. We want to characterize the properties of our filter, at normal incidence as well as at different tilt angles. Knowing the broadened profile is important for the interpretation of the solar images. Compensating the images for the degrading effects will improve the resolution and remove one source of image contrast degradation. In particular, we need to solve the latter problem for images that are also compensated for blurring caused by atmospheric turbulence. Methods. We simulate the process of image formation through a tilted interference filter in order to understand the effects. We test the hypothesis that they are separable from the effects of wavefront aberrations for the purpose of image deconvolution. We measure the filter transmission profile and the degrading PSF from calibration data. Results. We find that the filter transmission profile differs significantly from the <a class="link-external link-http" href="http://specifications.We" rel="external noopener nofollow">this http URL</a> demonstrate how to compensate for the image-degrading effects. Because the filter tilt effects indeed appear to be separable from wavefront aberrations in a useful way, this can be done in a final deconvolution, after standard image restoration with MFBD/Phase Diversity based methods. We illustrate the technique with real data.

Wavelength-Division Multiplexed Thin-Film Filters Used in Tilted Incident Angles of Light

Characteristics and Improvement of Dense Wavelength Division Multiplexing (DWDM) Thin Film Filters Used in Tilted Incidence

Design of Polarization Band-Pass Filters Based on the Theory of Thin-Film Photonic Crystal Superlattice

Tunable spatial demultiplexer based on the Fabry-Perot filter.

Depolarization F-P Thin Film-Filter Used in Tilted Incidence

Characteristics Analysis and Stack Design of Angle-tuned Filter

Investigation on the Wavelength Division Multiplexing Optical Thin-Film Filter

Omnidirectional Optical Filtering Based on Two Kinds of Photonic Band Gaps with Different Angle-Dependent Properties

C-band Three-Port Tunable Band-Pass Thin Film Optical Filter with Low Polarization-Sensitivity

Design of Polarization-Based Interleaver Filter for Dwdm Mux/Demux

High Sensitivity Long-Period Grating Tunable Filters in Standard Communication Fibers and Their Pdl Reduction

Optical Multi-Half-Wave Multi-Frequency Filtering Technology for Cwdm

Tunable Liquid Crystal Fabry-Perot Filter for Dense Wavelength Division Multiplexing System

Tunable Optical Filter Based on Liquid Crystal Fabry-Perot Etalon

Design of incident angle-independent color filter based on subwavelength two-dimensional gratings

Optimal Design and Arithmetic on Stack of Angle-Tuned Filter

Integrated Optical Filter Using Spiral-Based Cascaded Mach–Zehnder Interferometers

A Novel Three‐port Tunable Optical Filter and Crosstalk Analysis

Wavelength continuously tunable and wavelength spacing variable comb filter based on a High-Birefringence fiber loop mirror

A tilted interference filter in a converging beam

Wavelength Monitoring of DWDM Systems Using a Polarization Interference Filter Without Reference Light