Abstract:We demonstrated an all-fiber comb filter that can continuously tune the wavelength for four switchable wavelength spacings. The comb filter consists of a fiber loop mirror (FLM) that is inserted with three polarization maintaining fibers (PMFs) and three polarization controllers (PCs). The transmission characteristics of the comb filter was theoretically analyzed. The output characteristics of the comb filters shows a dependence of the orientation angles of the PCs. With the angles being optimally set, the comb filter with four different wavelength spacings can be achieved. The wavelength continuously tunable and wavelength spacing variable mechanisms are elaborated. The three PCs are employed to enable the tunable and switchable functions. The two PCs between the PMFs serve as a polarization rotator to align the birefringent axes of the PMFs for varying the wavelength spacing while the PC adjacent to the optical coupler can be used for wavelength tuning function. When the two quarter-waveplates (QWPs) of the PC are optimally set at π/4 and - π/4, the half-waveplate (HWP) acts as a wavelength tuning element, and when the QWPs are set at zero degrees, the HWP serves as an amplitude tuning element. The center wavelength of the comb filter could be linearly tuned with the rotation angle of the HWP, and a π/2 change in the rotation angle leads to a wavelength change in one free-spectral-range (FSR). A π/4 change in the rotation angle could bring the normalized peak transmission from its maximum at 1 to minimum at 0. The proposed tunable technique has been verified by our experimental results. We experimentally demonstrated the comb filters can switch among FSRs of 0.75 nm, 1.01 nm, 1.51 nm, and 3.1 nm with tunable functions.

Fibre-optic Comb Filter with Tunable Central Wavelength and Channel Isolation at Sub-Microsecond Speed

Selectable-FSR 10-Ghz Granularity WDM Superchannel Filter in a Reconfigurable Photonic Integrated Circuit

Photonic Integrated Circuit Implementation of a Sub-Ghz-selectivity Frequency Comb Filter for Optical Clock Multiplication

Tunable and configurable photonic microwave bandpass filter implemented in a radio-over-fiber link

Tunable and Channel Spacing Precisely Controlled Comb Filters Based on the Fused Taper Technology.

Fiber laser with dual-channel and a selectable comb filter based on Vernier effect of parallel-connected two Mach–Zehnder interferometers

Wavelength continuously tunable and wavelength spacing variable comb filter based on a High-Birefringence fiber loop mirror

TUNABLE FIBER FABRY-PEROT FILTER FOR OPTICAL CARRIER-SUPPRESSION AND SINGLE-SIDEBAND MODULATION IN RADIO OVER FIBER LINKS

A reconfigurable photonic microwave channelized receiver based on an optical comb

A Reconfigurable Microwave Photonic Channelized Receiver Based on Dense Wavelength Division Multiplexing Using an Optical Comb

In-line flat-top comb filter based on a cascaded all-solid photonic bandgap fiber intermodal interferometer.

Bandwidth and Center Wavelength Tunable Micro-Ring Optical Filter with Vernier Effect by Four Spectrum Combination

A Tunable Optoelectronic Oscillator Based on a Dispersion-Induced Microwave Photonic Filter

Tunable Fiber Fabry‐perot Filter for PM‐IM Conversion and Efficiency Improvement in Radio‐over‐fiber Links

Tunable, Ultra-Narrow-Band Optical Filter Based on A Whispering Gallery Mode Hybrid-Microsphere

Tunable optical frequency comb from a compact and robust Er:fiber laser

Comb filter based on an all polarization maintaining fiber loop and its applications

High Channel-Count Comb Filter Based on Chirped Sampled Fiber Bragg Grating and Phase Shift

Reconfigurable photonic RF filters based on integrated Kerr frequency comb sources

A Tunable and Reconfigurable Microwave Photonic Filter Based on Two Cascaded Modulators and A Dispersive Medium

Tunable and Reconfigurable Microwave Photonic Filter Implemented by Cascaded Mach-Zehnder Modulators and a Dispersive Medium